1. Burning rate: 250 Kg/hr.
2. It should be able to Operate not Less than 10 hours/day
3. This incinerator must be able to destruct all combustible wastes produced by hospitals, private clinics, laboratories, institutes, etc…
4. Design Specification: Types A, B, C, D, and E of medical waste
5. “PYROLYTIC” combustion, by controlling the gasification of waste.
6. The incinerator must avoid the release of black smoke and fine dust, (Smokeless) during the loadings.
7. It should be able to reduce the volume of wastes by 98%.
8. It should be able to hold emission in the second burn with gas residence of not less than 2 seconds.

This burner with “PYROLYTIC” burning should have:

9. The lower calorific power (L.C.P) of this waste will be 3,500 kcal/kg

• The Temperatures of combustion:Minimum will be 850^oC and max 1400^oC
• Post combustion: >1100^o

10. The Internal diameter of the Chimney: Ø 400mm² and its height: 8 Meter
11. The Volume of the combustion chamber: Not Less Than 2.3 M³
12. Burner operation should be Automatic On/Off
13. Fuel : diesel, LPG, Natural Gas, Bio fuel
14. The supplier must provide  necessary information for the best of  the installation

* Entirely limited door for the hand-operated loading of waste.The packing requirement to be Handbook, Set Lots,

15. A combustion chamber of waste:

* A burner of lighting which the usage is limited to the ignition of waste.

* Make-up of the refractory;

* Burner of illumination of waste, with gas, conventional mono-bloc dispersing routing diving flame, lighting and safety of electronic ignition, permanent air flow, electromagnetic sluice entrance of standard and also isolating shutoff.

* A burner of burning of gases,

* A device of shot of air enabling a total recombustion of gases,

• Refractory concrete :
  • . Thickness : ≥100 mm
  • . Nature: 42% of Al203
• Insulate in fibrous panels :
  • . Thickness: ≥75 mm
• Nature: Calcium silicate.

* A gadget of air inlet of air conditioning of waste gases,

* A sheath of emptying of the gases blistered.

16. Load Method: Top Loading

17. A chamber of post combustion of gases

* A burner of combustion of gases,

* A device of shot of air enabling a complete recombustion of gases,

* A gadget of air inlet of cooling of waste gases,

* A sheath of evacuation of the gases scorched.

* Carcass in solid sheet steel with support of connection.

* Composition of the refractory;

• Refractory concrete :
  • Thickness : ≥180 mm
  • Nature: 65% of Al203
• Insulate in fibrous panel :

The factory workshop local in liuhe Economic Development Zone, suburb of Nanjing and business division local in downtown region. Presently, incinerator line products marketplace insure former Soviet Union region, Africa states, Asia states and Middle East region.  From year 2010, we negotiated with upgraded technologies from Europe and America manufacturers and establish cooperation relationship in the territory of China marketplace. Regrettably, competition in different countries marketplace, nation discrimination and anxieties of intellectual property rights trigger failure finally. Currently we investment more attempt, capital and technology development in our own brand, we are to be among the largest incineration equipment on earth. We have trading branch company for expert export business support.

university hospital waste administration group in a tertiary care health center,1250 beeded hsopital.

our regular waste developed from sources is 0.55 kg/bed/day =685kg/day

we need an incinerator of 150kg/hour filling up ability.

plz reply with, obtaining, installation, running along with care cost.incinerators, particularly, clinical was heaters

Needs of Heater

1. Need to possess prep function, Incineration, Scrubber activities to thaw waste completely in addition to likewise waste gas have to be non-polluted

2. Ash must be just 5 percent of the waste material

5.

our day-to-day waste created from all resources is 0.55 kg/bed/day =685kg/day

we need a burner of 150kg/hour filling up skill. The specification of the Heater is as listed below:

Requirements of Burner

1. Should have preparation, Incineration, Scrubber activities to thaw waste completely and additionally waste gas need to become non-polluted

2. 1 year service guarantee

10. ISO Licensed

11. Mobile Burner

12. Electric