New Courtice incinerator Strikes further Flaws


CLARINGTON — Clarington’s brand new energy-from-waste facility will probably be postponed a second time since the boilers aren’t functioning properly and the continuing startup period could cost Durham Region an extra $1 million.

“I would rather see it postponed and done right than rushed,” said Clarington Mayor Adrian Foster.

The Durham York Energy Centre centre, situated in Courtice, has been scheduled to be completely operational on Dec. 14, 2014. Now the Durham York Energy Centre is not expected to be in complete working order before the last quarter of 2015.

The significant systems of the EFW facility have been tested. The boiler temperature is high enough to the combustion process but the steam temperature isn’t high enough, and officials aren’t sure what the problem is, states Durham’s works commissioner, Cliff Curtis.

The steam temperature has to be high enough to push the turbine-generator. If the steam is too cool it can damage the turbine.

“It’s like running a car with oil,” said Mr. Curtis.

Covanta, the business building and operating the centre for Durham and York regions, has taken down the boilers for alterations, according to Mr. Curtis. It’s likely to take three weeks to the repairs and alterations. Then there’ll be a four-week demonstration period, followed by a 30-day approval test.

“We are not getting the temperature we expected out of this boiler. “It’s Covanta’s problem to deliver us the item that performs the way that they said, so they are going to select the time that they require.”

The delay means added consultant costs for construction management, legal advice and baseline ambient air monitoring. A Durham Region works report said Durham’s share of the extra costs is $1 million, which can be offered from a temporary draw on the solid waste management book fund.

“What is the last price going to look like?” “There are clearly issues with getting out it ”

Since Jan. 16, Durham has been charging Covanta a 10,000-a-day late fee for each and every day that the EFW facility is not fully operational. The invoice was delivered to Covanta, but it has not been paid yet, according to Mr. Curtis.

In mid-February, the incinerator started burning its first haul of curbside garbage. It had been a part of a testing stage before the centre opens completely.

Durham cancelled landfill contracts and started sending garbage to the Courtice centre. Some garbage was burned at the EFW plant throughout the evaluation phase, without producing power to the grid.

Until the EFW facility is up and running, the Region simply pays Covanta half price of this agreed upon per-tonne charge. But, Durham isn’t making any money before the plant is fully operational and selling electricity back on the grid.

“We are still on budget.

The plant construction is coming in slightly under budget, according to the works commissioner.

There are a number of loose ends that might end up costing Durham Region more money. There is still disagreement with former home owners on the value of this land expropriated for the facility, and a ruling is not expected until fall of next year. The final price for the utility construction and connection costs is expected in coming months. The baseline ambient air monitoring runs till the EFW facility is operational, so the delay in opening signifies an ongoing monitoring price.

“There is some minor cost over-runs on a few of the smaller items but generally we’re fiscally on track to make this in on budget and we look forward to getting it online by the end of the calendar year,” said Mr. Curtis. A key part of the economic situation for your energy-from-waste facility is dependent upon it creating electric power revenue.

The Durham York Energy Centre is designed to process up to 140,000 tonnes of waste each year, and generate 17.5 gross megawatts of renewable energy — enough to power between 10,000 and 12,000 homes. A key part of the economic case for the energy-from-waste facility depends on it generating electrical power revenue.

from: http://www.durhamregion.com/news-story/5682601-new-courtice-incinerator-hits-further-delays/


Poultry Incinerator


Basic Info.

Pullution Sources:Solid Waste Processing
Processing Methods:Combined Water Treatment
Export Markets:Global

Additional Info.

Trademark:clover

Product Description

Clover Medical source Incinerator for pet animal cremation. This equipment can burn family pet and animal, cat, bird, dog, pig, etc.. The burn around 20-300kgs a hour.

Items Specification
Model TS10(PLC) / TS20(PLC) / TS30(PLC) / TS50(PLC) / TS100(PLC)
Main Product List Double Combustion Chamber
Smoke Filter Chamber
PLC Mode Control Case
Stainless Steel Chimney
Italy oil/gas burner: 02 units
Oil Tank (if oil fuel)

Incinerators in Fiji


IT is a daily occurrence to see black smoke being emitted from the chimneys in the Colonial War Memorial Hospital in Suva.

And after a recent letter to the editor from Satish Nakched, The Fiji Times followed up with an investigation into the smoke which poses an obstruction to the nearby residents of Waimanu Rd..

A common belief is that the smoke is a merchandise from body components being incinerated from the hospital.

Minister of Health and Medical Services, Jone Usamate clarified “the incinerator in CWM burns all clinical waste generated at the hospital”.

“The choice of type of wastes which should be incinerated follows global standards for disease control and disposal of clinical waste,” Mr Usamate explained.

Clinical waste includes blood, tissue, individual organs and other body components.

“Incineration happens in a controlled environment where things are incinerated at a very large temperature to kill all germs from the waste.

“Incinerators are used in hospitals all around the world and will be the preferred method to dispose of this waste as it retains the chances of spreading illness and disease to a minimum.

by: http://www.fijitimes.com/story.aspx?id=334379

 


Incinerator (TS20 PLC)


Basic Info.

Model NO.:TS20 PLC
Pullution Sources:Solid Waste Processing
Processing Methods:Combustion
Export Markets:Global

Additional Info.

Trademark:CLOVER
Packing:Full Container
Standard:20 kg per hour
Origin:China
Production Capacity:1000 Sets Per Year

Product Description

TS model PLC incinerator is latest design for waste treatment, include medical waste, animal cremation and other solid waste. This gear quality structural for kinds of site, creature pet incinerator for earnings,animal shelter incinerator available,animal waste cremator,animal waste furnace,animal waste incinerator for 50 kg,animal waste incinerator with heat exchanger,like hospital, environmental division, animal cremation bureaus, etc.. CLOVER Incinerator provide updated versions with dual combustion room and smoke filter room with refractory lines, and the combustion room temperature up to 1200 deg C.

Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC)
Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour
Feed Capacity 20kg 40kg 60kg 100kg
Control Mode PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm
Secondary Chamber 50L 110L 180L 280L
Smoke Filter Chamber Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual
Voltage 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1
Temperature Monitor Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm
Chimney 3Meter 3Meter 5Meter 5Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
1st. Chamber Temperature 800–1000 degree 800–1000 degree 800–1000 degree 800–1000 degree
2nd. Chamber Temperature 1000-1200 degree 1000-1200 degree 1000-1200 degree 1000-1200 degree
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm
 

50kgs per hour burner with 2 chambers vendors from china



50kgs per hour incinerator with two chambers suppliers from china
*Aveage 50kgs per hour
*Double chamber and double burner
*900liters primary combustion chamber
*Italy burner
*Stainless steel chimney

Variation

YD-50

Burning Cost

Average 50 kgs/hour

Feed Ability

Typical 150 kgs

Primary Burning Chamber

900 Litres

Added Combustion Chamber

300 Litres

Mix Burning Chamber

Yes

Smoke Filter Chamber

Yes

Feed Setting

Manual

Voltage

220V/380V

Power

0.7 Kw

Gas Type

Diesel Oil/ All-natural Gas/LPG

Heater

Italy Original

Oil Usage (Diesel Oil)

12.1– – 23.9 kg/hour

Gas Intake (Gas)

9.9– – 26.1 m3/hour

Interior Measurements

120 x 90 x 85cm (trick chamber)

Outdoors Measurements

200 x 160 x 310cm (without smokeshaft)

Temperature Level Monitor

Yes

Oil Container Capability( if oil gas)

300 Litres

Door Opening

62 x 80cm

Smokeshaft Size

5.0 Meters

Chimney Kind

Stainless-steel

Devices Gross Weight

5500 kgs

Procedure Technical Specs

Trick Chamber Temperature

800 ℃–– – – -1000 ℃

Secondary Chamber Temperature Level

1000 ℃ -1200 ℃

Residency Time

2.0 Sec.

Burning Performance

> 98%

Waste Lower Calorific Power

3000Kcal

Medical Environmental 


 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.



Farm Incinerator


Basic Info.

Model NO.:farm animal equipment cremation creamatotium incin
Export Markets:Global

Product Description

Key Features:  * All models with Dual combustion room.  * Stainless Steel chimney/stack, long lifetime. *based on order  * High temperature, long lifetime of incinerator.  * Free or minimal installation on site.  * High speed, from 10kgs to 500kgs per hourto 6ton per day.  *based on order  * New Design for pet animal cremation business.  * One year warranty on incinerator and components in stock. 

Application Scope:  1. Hospital& clinic: Iatric Waste, Infectious Waste, Dressing, Bio-Waste, Medicine.  2. Slaughter House &Pet Hospital &Farm: Dead Animal, Bio-Waste.  3. Laboratories, Remote Locations, Disaster Relief Operations, Animal Cremation 

Incinerator is a incineration gear, direct fire thermal oxidiser china, thermal oxidizer china, thermal oxidizer, poisonous gas waste disposal incinerator, poisonous wast provider in china, trailer mounted animal carcass incinerator, waste by gas fuel or oi fuel. As distinct circumscription, incinerator may be named many words as below: 

Therapy ability: Small scale incinerator, large scale incinerator and incineration pant. 

Waste material: Municipal waste incinerator, medical waste incinerator, animal cremation incinerator, human cremators 

Incinerator fuel: Gas incinerator, oil incinerator 

Waste to Energy (WTE): WTE incinerator, non-WTE incinerator 

Incinerator Manufacturer: China incinerator producer, UK incinerator producer, USA incinerator producer, India incinerator manufacturer. 

Famous Incinerator manufacturer firm: Inciner8(UK), Clover Incinerator(China), Pennram (USA), Haat (India) 

Burning Speed: 5kgs/hour, 10 kgs/hour, 15 kgs/hour, 20 kgs/hour, 30 kgs/hour, 50 kgs/hour, 100 kgs/hour, 150 kgs/hour, 300 kgs/hour, 500 kgs/hour

Items/Model YD-200 YD-300 YD-500 YD-600
Burning Rate (kgs/Hour) 200 kgs/Hr. 300 kgs/Hr. 500 kgs/Hr. 600 kgs/Hr.
Feed Capacity (kgs) 400 kgs 500 kgs 800 kgs 1100 kgs
Equipment Weight 7600 kgs 8300 kgs 13000 kgs 16500 kgs
Primary Chamber (Liters) 2000 2400 4000 5500
Secondary Chamber (Liters) 500 1200 1500 1500
External Dimensions (cm) 270 x 185 x 380 260x220x420 320x220x460 360 x 220 x 475
Internal Dimensions (cm) 180 x 115 x 96 220x110x100 257x147x108 300 x 147 x 125
Oil Tank(Liters) 300 500 500 500
Door Opening (cm) 59 x 81 90 x 110 108 x 128 108 x 128
Chimney (M) 10 10 14 14
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Secondary Chamber  YES YES YES YES
Mix-Combustion Chamber YES YES YES YES
Smoke Filter Chamber YES YES YES YES
Combustion Fuel Oil/Gas Oil/Gas Oil/Gas Oil/Gas
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Temperature Monitoring YES YES YES YES

Waste Incinerator (TS10 PLC)


Basic Info.

Model NO.:TS10 PLC
Pullution Sources:Solid Waste Processing
Processing Methods:Combustion
Export Markets:Global

Additional Info.

Trademark:CLOVER
Packing:Full Container
Standard:10 kg per hour
Origin:China
Production Capacity:1000 Sets Per Year

Product Description

TS model PLC incinerator is latest design for waste treatment, include medical waste, animal cremation and other solid waste. This equipment quality structural for kinds of site, like hospital, environmental department, animal cremation agencies, etc. CLOVER Incinerator supply updated municipal waste incinerator manufacturers,n e w incinerators ltd,nanjing clover medical technology,nanjing incinerators,natural gas animal incinerators, models with dual combustion chamber and smoke filter chamber with refractory lines, and the combustion chamber temperature up to 1200 deg C.

Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC)
Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour
Feed Capacity 20kg 40kg 60kg 100kg
Control Mode PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm
Secondary Chamber 50L 110L 180L 280L
Smoke Filter Chamber Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual
Voltage 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1
Temperature Monitor Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm
Chimney 3Meter 3Meter 5Meter 5Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
1st. Chamber Temperature 800–1000 degree 800–1000 degree 800–1000 degree 800–1000 degree
2nd. Chamber Temperature 1000-1200 degree 1000-1200 degree 1000-1200 degree 1000-1200 degree
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm