This model is small-scale waste incineration equipment for small waste output. 

Construction is dual/double combustion chamber with 02 units oil/gas burner. 

Waste feed chamber is around 900Liters (0.9m³, YD-50). Primary & Secondary 

combustion chambers and included mix-combustion chamber. Waste load on the 

bottom of chamber. Incinerator panel control suit for local operation.

Design	YD-50 with wet scrubber
Photo
Burning Cost	Ordinary 50 kgs/hour
Feed Ability	Typical 100 kgs
Main Combustion Chamber	900 Liters
Secondary Burning Chamber	200 Litres
Mix Burning Chamber	Yes
Smoke Filter Chamber	Damp Scrubber( Laundering Tower)
Feed Establishing	Manual
Voltage	220V
Power	7 Kw
Gas Kind	Diesel Oil/ All-natural Gas/LPG
Heater	Italy Original
Oil Use (Diesel Oil)	16.9 kg/hour
Gas Consumption (Gas)	***
Internal Measurements	120x90x85cm (vital chamber)
Outside Measurements	400x200x230cm (without smokeshaft)
Temperature Level Degree Screen	Yes
Oil Container Ability( if oil gas)	300 Litres
Door Opening	62 x 68cm
Chimney Size	5.0 Meters
Smokeshaft Type	Stainless Steel
Equipment Gross Weight	6000 kgs
Treatment Technical Specifications
Main Chamber Temperature		800 ℃–– – – -1000 ℃
Extra Chamber Temperature		1000 ℃ -1200 ℃
Residency Time		2.0 Sec.
Burning Efficiency		＞ 98%
Waste Lower Calorific Power		3000Kcal

Items/Model	TS100( PLC)
Image
Principle	Waste Incineration Therapy
Burn Cost	Criterion 100 kg/hour
Feed Ability	Criterion 200kg/feeding
Control Mode	PLC( Programmable Reasoning Controller Burner)
Burning Chamber	1200L
Inside Measurements	120x100x100cm
Extra Chamber	600L
Smoke Filter Chamber	Yes( Dry Scrubber)
Feed Establishing	Handbook
Voltage	220V
Power	0.7 Kw
Oil Consumption (kg/hour)	normal 20.4
Gas Use (m3/hour)	average 24.5
Temperature Level Monitor	Digital Program
Temperature Level Defense	Yes
Oil Storage Space Container	200L
Feed Door	80x60cm
Chimney	10Meter
Smokeshaft Kind	Stainless-steel
1st.	Gross Weight
6000kg	Outside Dimensions
260x150x180cm
Gross Weight	6000kg
External Measurements	260x150x180cm

Items/Model	TS200( PLC)
Image
Principle	Solid Waste Incineration Therapy
Melt Price	Average 250 kg/hour
Feed Ability	Requirement 350kg/feeding
Control Establishing	PLC( Programmable Logic Controller Burner)
Burning Chamber	1800L
Internal Measurements	150x110x110cm
Second Chamber	750L
Smoke Filter Chamber	Yes
Feed Mode	Handbook
Voltage	220V
Power	0.9 Kw
Oil Intake (kg/hour)	Common 28
Gas Usage (m3/hour)	Typical 33.6
Temperature Level Display	Digital Existing
Temperature Level Degree Security	Yes
Oil Tank	300L
Feed Door	80x60cm
Smokeshaft	10Meter
Smokeshaft Kind	Stainless-steel
1st. Chamber Temperature Level	800 ℃–– – – -1000 ℃
2nd. Chamber Temperature Level	1000 ℃ -1200 ℃
Residency Time	2.0 Sec.
Gross Weight	8500kg
Exterior Dimensions	300x160x190cm

Heater procedure should certainly be Automatic On/Off

Gas: diesel

The supplier need to supply needed details for the very best of the installment

This burner with “PYROLYTIC” burning need to have:

;

・ Refractory concrete:

§. Thickness: ≥ 100 mm

§. Nature: 42% of Al203

・ Guard in coarse panels:

§. Thickness: ≥ 75 mm

・ Nature: Calcium silicate.

* Heater of illumination of waste, with gas, typical mono-bloc casting directing diving flame, lights and additionally safety and security of digital ignition, permanent air circulation, electro-magnetic sluice entry of guideline in addition to isolating valve.

* Plate of burning in Carborundum, staying clear of the taking care of glass along with slags.

A chamber of short article burning of gases

* A heating system of burning of gases,

* A gadget of shot of air making it possible for a total recombustion of gases,

* A device of air inlet of air conditioning of waste gases,

* A sheath of clearing of the gases charred.

* Carcass in solid sheet steel with assistance of web link.

* Structure of the refractory;

・ Refractory concrete:

§ Thickness: ≥ 150 mm

§ Nature: 65% of Al203

・ Protect in rugged panel:

§ Thickness: ≥ 85 mm

Nature: Calcium