Including:Incinerator: Structure to be specified
The mark to be specified
Water temperature: 800 to 1000 ° C;
Refractory
Temperature of more than 1100 ° C + obtained;
Capacity: 20-50 kg / hour
Fireplace: 4 to 6 meters high;
Dimension 70 cmx70 crn
Height: 1.10 meters
Fuel: coal;
Aspiration: natural

– A receiving cage for biomedical waste;

– A combustion chamber with a chimney with a filter to retain the ashes;

Chimney section: about 300 cm; With a minimum height of 6 m

Door size: approximately 50×60 cm

Supplied with a 500 liters fuel tank and all necessary accessories for installation.
–                          INCINERATOR for pharmaceutical waste treatment with                  a scrubbing system

With the following technical data:

1.      One pharma solid waste incinerator unit containing two combustion chambers and based on steel base with scrubbing

system.

2.      Working hour /day: minimum 10 hours/day.

3.      Capacity: Approximated 150 kg/hr. Over 10 hrs.

4.      Wastes characteristics:

·         BULK density: 70 – 100 kg/ bm³.

·         Calorific value: 2000-3000 kcal / hr.

·         Moisture content: 20-30%by weight.

·         Ash content: 2 – 8 % by weight.

·         Plastic content: 15-20 % by weight.

5.      Two combustion chambers.

6.      Operating temperatures:

·         First chamber: not less than 700 – 800 °c.

·         Second chamber: not less than 1200 °c (during steady operation).

7.      The burners should be automatically switched off if any of the combustion chambers doors is open.

8.      The burners of the first and second combustion chambers are selected for burning diesel oil (light fuel).

9.      Automatic loader and unloader to be provided.

10.     Exhaust gases to be comply with International Environmental code and requirements.

OVERALL REACHED COLLECTION

Layout in addition to Create approved gas metering system.
8.
16. Details of space available: Not restricted
19. How fast do you require the machine to be supplied? : Sea Freight to Port of Cairns, Queensland, Australia in approximately Two months.
11. Approximate moisture articles: Variable
( Cont would certainly)

4. ) The Service provider will offer in addition to totally comply with all needs from the associated authority during design stage, design authorization, appraisal and after evaluation, handing over the machine package whether it is plainly exhibited or yet considered needed for successful conclusion in addition to contentment to the jurisdiction. The Contractor has to acknowledge his tender cost all direct and indirect price at no extra price to the Client for all such conformities.7.
20. City in addition to state of usage: Australia.
13. What is the height of this smokeshaft required? : No chimney is called for. Flue length Should be approximately 2 to 3 metres to connect to a downstream Procedure
22. Any sort of different details requirements: Primary burning chamber is required. Solid and also ignitable waste products require in order to be together with the capacity of being recovered from the incinerator quickly using an automated therapy. This is due to the fact that the incinerator will surely be called to operate 24/7. Rotating kiln or transferring floor may be thought about if believed sensible by the distributor. One initial incinerator is needed for a proof of idea task and also future orders for the successful vendor, after successful implementation of the project, are most likely to be significant.
18. Do you call to get a gas scrubbing system? : [] Yes [X] No.
9. Number of waste generated each day in kg: 3 -5 tonnes per day
10. Stage – incinerator will be used per day: 1– 8 hours1– 16 hrs/ Constant
23. It would be most valuable in the event the provider might send out a video of their incinerator in performance or layouts in addition to photos to demonstrate how it works.

5. The Professional will probably be in charge of all upkeep of their machine, routine and also periodical maintenance such as cleaning up etc. , upon completion, prior to and also following examination. The maintenance will be in fully conformity to the jurisdiction needs in addition to fulfillment and also shall be deemed included in the Specialist tender cost in addition to at no extra cost to the Client.

6. The Contractor must send to the S.O their proposed system plan detail, so that includes jurisdiction authorization and an A4 or A3 preliminary dimensioned system design fitting into place allocated in the plan drawing. For upkeep and solutions during Problem Liability Duration, respond period to any type of criticism for the Contractor to take part in shall be within 24hours

8. The Cremators plan will, inter alia, inclusive the tasked with scope:

– – Heating System Chamber along with Afterburner

– – Burning System

– – Control Board

– – Solitary refactory lined chimney for two cremators

– – Flue Gas Tasting Platform

– – Electrical circuitry inside the system requires

– – Raking Tools

– – Ashbox

– – Authorization from DOE/ Regional Authority

– – Any other scope/works Needed for its systems

The Professional provides a Cremation System bundle for TWO (02) Cremators and system approved by related jurisdiction, which will need to suit the alloted area as shown on the plan drawings. The job will include however not confined to make prep function, authority layout consent, supply, fabricate, construct, appointing, testing, functional approval, provide training in addition to additionally support warranty of the machine package. The job includes all preliminaries, related civil and also structural function, mechanical along with electrical project in addition to all external project required for the correct completion in addition to operational of the machine and as adheres to: The incinerator will surely be used to get a group of private multi profile medical facilities.

The hourly-generated waste has to do with 100kg per hourhowever with 1000kg daily amount.

As a consequence of the fiscal circumstance in Bulgaria currently, our researches demonstrates that a 100kg/hour system can match the needs set at work.

Please, offer us an Incinerator system that can match the parameters defined above. We prepare to offer details that’s more comprehensive if you require such one. Within the specialized requirements of you thing we will need to have complete particulars of the specifications of exhaust gases, together with all certificates you have about the ecological safety regarding EU directives.

1. All preliminaries that will include but not limited to offering job insurance coverages, taxation, mobilisation and demobilisation, arrangement administration and guidance, design and also expert charge, authority style approval, functional approval, website prep function, momentary storage, health and health environmental safety and safety and safety, setting out, CIDB levy, responsibilities, deposits, penalties, fees, payment yet not leaving out only the bank guarantee to this jurisdiction JPP which will be offered from the Client, growth coverage and also other called for preliminaries for effective conclusion of the work.This type of burner is exactly what you have described as a ‘‘ reduced temperature thermal disintegration incinerator’. We can speed up the burning procedure using warm air from a downstream process that can be fed straight back right into the incinerator to elevate the burning temperature.

– – Ashbox

– – Authorization from DOE/ Regional Authority

– – Any other scope/works required for the systems