Capacity    Not less than 500Kg/hr.
Operation    24hr-7days/week continuous operation.
Combustion chamber    2 combustion chamber.
Temp.    First combustion chamber 800-1000 C.
Secandry combustion chamber 1000-1200 C, with the possibility to be upgraded to 1400 C.
Combustion Efficiency    99.99%
Retention time    Of the flow gases not less than 2 Sec in the hot portion.
Excess Oxygen concentration    Of primary combustion chamber 3-6% max.
Refractory    The chambers should be lined with high thermal insulating refractory bricks with suitable thickness and with highly temp. resistance. Not less than 1400 C for the first combustion chamber, and not less than 1600 C for the secandry combustion chamber, and at the same time prevent the Temp. of the outside body of the chamber not higher than 70 C.
Doors    Should be lined with the same bricks, and the edges lined with special suitable insulating material to prevent any gas escaping, and the doors should be kept under negative pressure during the operation.
Air Emission Control System    With high destruction and removal efficiency (DRE). Not less than 99.9999 as per KEPA.
Wet System    If the system equiped with a CEMS washing the flow gas with water, then it should be manufactured from suitable anti corrossion materials, and equiped with pH meter to measure and neutralize the water. It should be able to use the water in closed recycled circuit many times before treating/ discharging into the sewage system in compliance with KEPARS.
Chemical dosing    It should be equiped with suitable autochemical dosing system to control the pH for the water of the wet scrubber system including sensors.
Chimney    It should be suitable with the capacity and the technical specifications, with height not less than 12m from ground level. With easy opennable sampling point equal about 3 inch, and the optimum sampling locations is at least 8D downstream direction and 2D upstream from any flow disturbancies.
Sampling point    Should be equiped with a platform located down the sampling point by a distance not less than 1 m, and equiped with suitable stairs from ground to the port with comfortable slope.
Ash Removal    It should be auto ash removal system.
Fuel    It should be dual system, such as diesel and natural gas.
Feeding System    Should be auto feeding system into primary chamber.
Control Room    Should be equiped with a control panel shows Temp. of the combustion burners, gas monitoring, digital Temp. indecation for the primary/secondary chambers, digital Temp. indication for the gases…etc. it should be also Auto operation, burnures on/off auto lamps switch, auto start/stop for air emission control system, auto gas continuous monitoring system reading and print out of gas emission parameters…etc.
Cooling System    The primary chamber should be provided with auto cooling systemthrough nozzles to permit direct cooling if the Temp. will be heigher than 1100 C.
Inter-lock system    The incinerator should be equiped with inter-lock system to prevent feeding the waste to the primary chamber if the combustion Temp. less than 500 C.
Flue treatment and cleaning    To consist a combined system (wet/dry), using water, lime, active carbon and ceramic filters.
Quenching system/Heat exchanger    Should be made and manufactured from anti corrosion and acid attack materials such as stainless steel 316 or equivalent.
Noise Level    Not more than 85 dBA during normal operation.
Inaddition    The desigh should insure that responsive fail-safe control systems are used.
The incinerator should be installed inside closed suitable building with good aeration and ventilation system. The building has facilities for off-loading of wastes from transport vehicles. Auto cleaning system for trucks and waste containers, and cool storage area…etc.
The quotation should included list of original spare parts for 7 years.
The quotation should include supervising, starting up and training of the operators and ministry of health engineers inside/outside Kuwait.
Detailed drawings, catalogs should be included.

Product Description

Waste Incinerator International Market Analytics  Date.

Key Word:  Little incinerators  Medical waste incinerator  Pet animal cremation incinerator  Incinerator makers

Incinerator is a incineration gear, direct fire squander from gasoline fuel or oi gas. As different circumscription, incinerator could be named many words as below: 

Treatment capacity: Small scale incinerator, large scale incinerator and incineration pant.  Waste material: Municipal waste incinerator, medical waste incinerator, animal cremation incinerator, individual cremators  Incinerator gas: Gas incinerator, oil incinerator  Waste to Energy (WTE): WTE incinerator, non-WTE incinerator  Incinerator Manufacturer: China incinerator manufacturer, UK incinerator producer, USA incinerator producer, India incinerator manufacturer.  All around the world, in most nations, people anti incinerator since the incinerator will create a large Dioxin in the smoke. “Dioxins” refers to a group of poisonous chemical compounds that share certain chemical structures and biological features. Smart ash price, smartash incinerator price, smokeless crematorium, sterilization by incineration, supplier waste incineration china, syc 30 inciner, syc hospital, Dioxins could be released into the environment through woods fires, backyard burning of trash, certain industrial activities, and residue from previous commercial burning of waste. Dioxins break down very slowly and previous releases of dioxins from the man-made and natural resources still exist in the surroundings. Anyhow, we must remind this, that is large scale incineration pant, generally more than 30 ton every day. This is a societal problem, to examine and suggest ways in various angles from the public, government, economic growth, environmental protection, technology advancement, etc. 

So, why we still use incinerator?  First, for the medical waste in the hospital, the pyrolytic incinerators is best treatment up to now. Pyrolytic technology can ruin the virus, pollution control.  Secondly, for individual body, pet animal, in most nations and regions, we want to cremation them. This is the ceremony in the procedure for society growth, and ceremonies to commemorate the disappearance of life. 

As preceding two reason although not just above, we still use incinerators. 

the way you are able to find reasonable incinerator to your regional site?  Incinerator is not a cheap equipment, generally the little scale version 's price around $5, 000USD per unit and large scale version 's price more than $50, 000USD each unit. Thus, before purchase one unit incinerator, you need to make clear after items: A, burn out what? Incinerator is a incineration gear, function is flame squander. So what kind of waste that you would like to cure?  B, little or large? This according to the waste output daily or the waste volume per feed time, like animal size.  C, fuel? Incinerator use gas or oil , generally, gas fuel is cheaper than oil and the smoke cleaner than oil fuel model. But some neighborhood site don't have gasoline distribution system.  Along with other tech items, such as power(220V, 380V), waste feed door kind, incinerator structure, etc..

Once you clarify these, it is possible to go to find a local or international producers, requesting prices, technical specifications and finally purchasing the right products. 

Wrote by Nicky

Nanjing Clover Medical Technology Co., Ltd..

Product Description

1.

3. Payment Term:  By sea: 50% deposit T/T (bank transfer) in advance, and 50% balance T/T before sending day.  By Train: 100 percent T/T in advance. 

4. Shipping Document & Packing: Generally, We provide (1)Bill of Lading (Way Bill), what's sample…(2)Commercial Invoice, (3)Packing List ONLY.  If any further documents/certification and tag print/words on packing documents or material which ask by importer or local customs, whatever happen in China or oversea, should notify seller in advance and charge as actual price. For instance, Fumigation Certification, embassy certification, BV/SGS…Inspection, certification of original (C/O), Form A, etc.. Heat value of medical waste, hog incinerator and cost, hog incinerators, residence incinerator, hospital incinerator feed, hospital incinerator images, hospital incinerator in China, Buyer must to notify seller in advance and pay these price. Seller save rights to postpone/cancel shipping and ask lost price cause this incident. If the importer local customs arrest/request penalty or other situation caused by buyer error, Clover Medical save all right to ask compensation/litigation. Thank you for your cooperation. 

5. The leading time is mostly 3-6 weeks, depending upon the products and quantity. 

7. Guarantee: One year for the gear. We provide spare parts for maintenance, free charge within the first year and the shipping cost is on the purchaser. 

8. Insurance: Bear all risks of loss of or damage to the goods from the time they have passed the boat 's rail at the named port of shipment. We proposition apply All Risks insurance under every contract. When purchaser pick goods at local site, must inspect carefully. If any damage occurred under insurance coverage, buyer must notify insurance business and Clover Medical Limited immediately. We will provide necessary assistance.

Our attention is for disposing mainly cytotoxic waste, particularly out of date or out of specs cytotoxic medicines. Numerous other wastes for which we would like to acquire rid of enhancement to the cytotoxic waste includes obsolete or out of specs pharmaceuticals (however not always narcotics), sharps (needles) and also so on.

It is additionally really critical for us to recognize whether the device is certified to manage cytotoxic waste in addition to also the characteristics in addition to disposal of treatment residue.

Nanjing Clover Medical Technology Co., Ltd.. Is a top waste incinerator manufacturer in China. We’re local manufacturer and one of the largest exporter of China. Pyrolytic incinerator gear technical is main waste treatment all of the planet, for Medical Waste, what is a biological incinerator for pets, what is double chamber incierator, what is the average cost to get a medical incinerator, what is the cost of a pet cremation incinerator, Animal Incineration, Pet cremation and other Solid wste. The potential from 10kgs/Hr. To 500kgs/Hr. Up to 6ton per day. Currently , we supply different show for local customer requirements and layout upgraded incinerator with our top technology. The upgraded design feature of our assortment of incinerators make them one of the most cost effective in the world.