Needle Incinerator(Needle & Syringe Destroyers) and Micro Incinerator for COVID 19 waste


Needle Incinerator(Needle & Syringe Destroyers) and Micro Incinerator for COVID 19 waste.



HICLOVER Solution for Fighting COVID-19, Medical Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/ 

Nanjing Clover Medical Technology Co.,Ltd.


 


County scraps plans for waste-to-energy incinerator


The Board of County Commissioners struck plans Thursday to get a regional waste-to-energy incinerator, preferring to haul the county’s waste into a landfill with a short-term contract rather. Commissioners Paul Smith and Billy Shreve cast the dissenting votes to keep the project on the dining table while the county explores its options.

“It is absolutely no charge to the county to keep these options available,” Smith stated. “To do away with these options is mad.”

Terminating the project won’t cost the county any money as the Northeast Maryland Waste Disposal Authority, a quasi-governmental agency which helps the county fulfill its trash disposal needs, will pay the $500,000 conclusion fee. Any remaining funds after this payment is going to be divided between Frederick County and Carroll County, which was a partner in the project. These funds are out of obligations the authority has obtained from Wheelabrator after the service contract was executed in 2010.

However, Young said that he saw no purpose in voting to keep plans for an incinerator, which would burn garbage into energy, open because County Executive-elect Jan Gardner intended to scrap the facility after taking office Dec. 1. Young stated.

County Attorney John Mathias stated Gardner held the power to determine the fate of the incinerator project, not the County Council, when a decision was not made Thursday.

“I believe that you should terminate the entire thing,” Gardner testified in front of the plank and approximately 100 people gathered at Winchester Hall, garnering some applause.

The board unanimously voted in favor of transporting the county’s crap into a out-of-state landfill for $50.95 per ton with a highest last-minute contract.

After considering five suggestions, including three out-of-state prices and two waste-to-energy facilities outside Maryland, the commissioners narrowed their options between two landfills with varying contracts.

Commissioners formerly leaned toward the first option, which provided contracts stretching 25 years at an average of $54.97 per ton, though this cost might escalate annually with the consumer price index and gas rates. On the other hand, the board chose the second option, which Gardner also preferred.

About 30 people testified in front of the board concerning the incinerator project, with a bit more than half in favor of scrapping it and the rest advocating for maintaining the project on the desk to consider it more intensely.

“The incinerator is a waste of energy, a waste of resources (also ) a waste of cash,” Brunswick resident Ellis Burruss testified. “It would be good not to waste any more time .”

Other inhabitants noted that the proposed location of the incinerator, near Monocacy National Battlefield, would ruin the playground ’s tourism and beauty.

However, resident Greg Brown voiced his support for a regional incinerator, supposing it was more environmentally friendly than the other options commissioners were considering.

“Even the top landfills … are at least three times more pollutant than the usual waste-to-energy facility,” Brown stated.

Another resident stated Europe has been constructing waste-to-energy centers for years with no unwanted effects that many have brought up.

“I was actually with this (incinerator project), but with all the energy prices and Carroll County falling out … that I ’m not,” Delauter said, echoing the thoughts of Young and Gray.

Another resident said Europe has been building waste-to-energy facilities for years without the negative consequences that many have brought up.

Jim Warner, CEO of the Lancaster County Solid Waste Management Authority in Pennsylvania, pitched a proposal for hauling the county’s trash, but the commissioners decided to go with an undisclosed out-of-state landfill with a short contract.

“I was actually for this (incinerator project), but with the energy prices and Carroll County dropping out … I’m not,” Delauter said, echoing the sentiments of Young and Gray.

by: http://besttopics.net/link/214519_county-scraps-plans-for-waste-to-energy-incinerator-politics-and-government-frederick-news-post


Clover Incinerator


Product Description

The factory workshop local in liuhe Economic Development Zone, suburb of Nanjing and company office local in downtown region. Presently, incinerator line goods marketplace cover former Soviet Union region, Africa countries, Asia countries and Middle East region.  From year 2010, we negotiated with updated technology from Europe and America manufacturers and establish alliance relationship in the land of China marketplace. Unfortunately, competition in other countries marketplace, nation discrimination and worries of intellectual property rights cause failure eventually. Presentlywe investment more attempt, funding and technology development in our own brand, we’re to be among the most significant incineration equipment in the world. We have trading division company for expert export company support. 

Incinerator is a incineration gear, direct fire waste from gasoline fuel or oi fuel. As different circumscription, incinerator could be named many words as under: 

Therapy capacity: Small scale incinerator, big scale incinerator and incineration pant. 

Waste substance: Municipal waste incinerator, medical waste incinerator, animal cremation incinerator, individual cremators 

Incinerator fuel: Gas incinerator, oil incinerator 

Waste to Energy (WTE): WTE incinerator, non-WTE incinerator 

Incinerator Manufacturer: China incinerator manufacturer, UK incinerator manufacturer, USA incinerator manufacturer, India incinerator manufacturer. 

Famous Incinerator manufacturer company: Inciner8(UK), Clover Incinerator(China), Pennram (USA), Haat (India) 

Burning Rate: 5kgs/hour, 10 kgs/hour, 15 kgs/hour, 20 kgs/hour, 30 kgs/hour, 50 kgs/hour, 100 kgs/hour, 150 kgs/hour, 300 kgs/hour, 500 kgs/hour

Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC)
Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour
Feed Capacity 20kg 40kg 60kg 100kg 200 kg
Control Mode PLC PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L 1200L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm
Secondary Chamber 50L 110L 180L 280L 600L
Smoke Filter Chamber Yes Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual Manual
Voltage 220V 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2
Temperature Monitor Yes Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L 200L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm
Chimney 3Meter 3Meter 5Meter 5Meter 10Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
1st. Chamber Temperature 800degree–1000degree 800degree–1000degree 800degree–1000degree 800degree–1000degree 800degree–1000degree
2nd. Chamber Temperature 800degree–1000degree 800degree–1000degree 800degree–1000degree 800degree–1000degree 800degree–1000degree
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm

Incinerators for Medical Waste Disposal


Product Description

TS model PLC incinerator is newest layout for waste treatment, include medical waste, animal cremation and other solid waste. This equipment quality structural for kinds of site, cremation incinerators, cremation manufacturing company, cremation manufacturers, cremation of animals in malaysia, cremator burners, crematoriam incinerator, crematorium animal, like hospital, environmental division, animal cremation services, etc… CLOVER Incinerator supply updated versions with dual combustion room and smoke filter room with refractory lines, along with the combustion room temperature up to 1200 deg C. 

Key Features:  * All versions with Dual combustion room.  * Stainless Steel chimney/stack, long life. *according to sequence * High fever, long life of incinerator.  * Free or minimal installation on site.  * High speed, from 10kgs to 500kgs per hourto 6ton per day.  *according to order  * New Design for pet animal cremation business.  * One year guarantee on incinerator and components in stock. 

Program Scope:  1. Hospital& clinic: Iatric Waste, Infectious Waste, Dressing, Bio-Waste, Medicine.  2. Slaughter House &Pet Hospital &Farm: Dead Animal, Bio-Waste.  3. Laboratories, Remote Locations, Disaster Relief Operations, Animal Cremation

Items/Model TS50(PLC)
Picture  
Burn Rate 50 kg/hour
Feed Capacity 100kg
Control Mode PLC
Combustion Chamber 560L
Internal Dimensions 100x80x70cm
Secondary Chamber 280L
Smoke Filter Chamber Yes
Feed Mode Manual
Voltage 220V
Power 0.7Kw
Oil Consumption (kg/hour) 12.1–24
Gas Consumption (m3/hour) 9.9–26.1
Temperature Monitor Yes
Temperature Protection Yes
Oil Tank 100L
Feed Door 70x55cm
Chimney 5Meter
Chimney Type Stainless Steel
1st. Chamber Temperature 800degree–1000degree
2nd. Chamber Temperature 1000degree-1200degree
Residency Time 2.0 Sec.
Gross Weight 4500kg
External Dimensions 230x130x155cm

burning 150 kg of waste incinerator


In an attempt to bring a partial relief from the mounting waste disposal difficulties, a new incinerator will start working at the Kozhikode Medical College soon.

The incinerator has been installed using the fund from the Hospital Development Society (HDS).

HDS member Saleem Madavoor advised’City Express’ that the society has allotted’15 lakh towards the expenses which will be acquired for the installation functions.

An official of the medical school said that an expert group, deputed by SIDCO, has seen the medical school to review the primary arrangements.

The work order has been given to SIDCO and an agreement was signed between the medical college authorities and SIDCO officials three weeks back.

The medical school official added that the functions of the incinerator are finished and setup works will start within couple of days.  When the new incinerator begins operating, the waste disposal issues will be partially addressed. The incinerator which has a potential of burning 150 kg of waste, will dispose of the residue generated by the medical college hospital.

Meanwhile, the medical school will continue to grapple with the waste being produced from the Institute of Maternal and Child Health (IMCH) and Super Specialty block because the incinerator for these cubes, which are suggested at a price of’63.5 lakh by the state authorities still remains on papers. If the incinerator becomes a reality around 5,000 kg of waste could be disposed regular.

advice from: http://www.newindianexpress.com/states/kerala/Waste-Woes-Medical-College-Gets-Partial-Relief/2015/07/17/article2924500.ece


Hazardous Waste Incinerators


Basic Info.

Export Markets:Global

Additional Info.

Trademark:clover

Product Description

Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC)
Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour
Feed Capacity 20kg 40kg 60kg 100kg 200 kg
Control Mode PLC PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L 1200L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm
Secondary Chamber 50L 110L 180L 280L 600L
Smoke Filter Chamber Yes Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual Manual
Voltage 220V 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2
Temperature Monitor Yes Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L 200L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm
Chimney 3Meter 3Meter 5Meter 5Meter 10Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm

We, Clover Medical Limited, Located at China mainland.

10 Kg Waste Incinerator


Basic Info.

Pullution Sources:Solid Waste Processing
Processing Methods:Combustion
Export Markets:Global

Additional Info.

Trademark:clover

Product Description

Nanjing Clover Medical Technology Co., Ltd..

Items/Model YD-10C YD-20C YD-30C YD-50C
Burning Rate (kgs/Hour) 10 kgs/Hr. 20 kgs/Hr. 30 kgs/Hr. 50 kgs/Hr.
Feed Capacity (kgs) 40 kgs 40 kgs 50 kgs 80 kgs
Equipment Weight 1200 kgs 1200 kgs 1800 kgs 2200 kgs
Primary Chamber (Liters) 200 200 250 400
Secondary Chamber (Liters) 140 140 140 140
External Dimensions (cm) 170x140x160 170x140x160 170x140x190 180x160x200
Internal Dimensions (cm) 55x55x65 55x55x65 55x55x85 70x70x85
Oil Tank(Liters) 50 100 100 150
Door Opening (cm) 38 x 48 38 x 48 38 x 48 45×55
Chimney (M) 5 5 5 5
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Secondary Chamber  YES YES YES YES
Mix-Combustion Chamber YES YES YES YES
Smoke Filter Chamber YES YES YES YES
Combustion Fuel Oil/Gas Oil/Gas Oil/Gas Oil/Gas
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Temperature Monitoring YES YES YES YES

Key Features:  * All versions with Dual combustion chamber.  *based on sequence * High fever, long life of incinerator.  * Free or minimal installation on site.  * High burn rate, from 10kgs to 500kgs per hourto 6ton per day.  * PLC Control Plane. *based on order  * New Design for pet animal cremation enterprise.  * One year warranty on incinerator and components in stock.

Incinerator for Laboratories


Basic Info.

Model NO.:incinerator for animals sale price

Product Description

Incinerator is a incineration equipment, direct fire waste by gas fuel or oi fuel. As different circumscription, incinerator could be termed many words as under: 

Treatment capacity: Small scale incinerator, big scale incinerator and incineration pant.  Waste material: Municipal waste incinerator, medical waste incinerator, manila animal incinerators, fabricate de crematorium, maker of hazardours waste incinerator in china, maker of hazardous waste incinerator in china, animal cremation incinerator, individual cremators  Incinerator fuel: Gas incinerator, petroleum incinerator  Waste to Energy (WTE): WTE incinerator, non-WTE incinerator  Incinerator Manufacturer: China incinerator producer, UK incinerator producer, USA incinerator producer, India incinerator manufacturer.  Famous Incinerator manufacturer firm: Inciner8(UK), Clover Incinerator(China), Pennram (USA), Haat (India)  Burning Rate: 5kgs/hour, 10 kgs/hour, 15 kgs/hour, 20 kgs/hour, 30 kgs/hour, 50 kgs/hour, 100 kgs/hour, 150 kgs/hour, 300 kgs/hour, 500 kgs/hour 

A Model animal crematory burning rate from 20-400kgs a hour. Heavy duty combustion room and suit for big animal cremation.  In post combustion chamber. Virtually smoke and odor free. 

Smoke Filter Chamber with filter Virtually smoke and odor free after burningoff.

Italy first oil or gas burner, quality dependable. It suit for diesel oil, natural gas, LPG gas. 

User guider, full installation and operation document for client.

Items/Model A1500 A2400 A4000 A5500
Burning Rate *animal 90 kgs/Hr. 150 kgs/Hr. 200 kgs/Hr. 400 kgs/Hr.
Feed Capacity *animal 120 kgs 200 kgs 300 kgs 500 kgs
Equipment Weight 7000 kgs 8300 kgs 13000 kgs 16500 kgs
Picture  
Primary Chamber (Liters) 1500 2400 4000 5500
Secondary Chamber (Liters) 500 1200 1500 1500
External Dimensions (cm) 240x170x380 260x220x420 320x220x460 360 x 220 x 475
Internal Dimensions (cm) 150x100x96 220x110x100 257x147x108 300 x 147 x 125
Oil Tank(Liters) 500 500 500 500
Door Opening (cm) 59 x 81 90 x 110 108 x 128 108 x 128
Chimney (M) 10 10 14 14
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Secondary Chamber  YES YES YES YES
Mix-Combustion Chamber YES YES YES YES
Smoke Filter Chamber YES YES YES YES
Combustion Fuel Oil/Gas Oil/Gas Oil/Gas Oil/Gas
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Temperature Monitoring YES YES YES YES