large animal incinerators


The incinerator shall also be equipped with special loading devices and mechanisms that allow safe incineration of

solid waste simultaneously with liquid sludge. Loading of solid waste may be achieved through bags.

 

All intermediate piping, bellows and other fittings for connection between the tanks

, burner, compressor and other equipment supplied on the skid shall be supplied by the successful bidder. Bidder shall

indicate connection points for sludge, DO and Hot water. Pipings up to these connection points will be on the charge of

the CEB. All equipment, such as pumps, blower fans, compressors and etc forming part of the incinerator lot shall take

their electrical supply from an electrical panel. The panel should  be  equipped  with  appropriate  circuit  breakers

and  contactors  for  each component and shall allow independent padlocking of the equipment by operators without

intervening from inside of the panel. All padlocking works shall be made from outside the electrical panel. The

Electrical panel shall take supply from an external 3 phase supply.

 

 

2.4  Electrical Panel

 

The panel nominal voltage shall be 415 Vac and its rated insulation voltage shall be 1000 Vac.

 

–      The main compartment shall be fed from an existing switchboard

 

 

The panel shall be of factory assembled, metal clad and draw-out type in design for outdoor application.


Pdf Catalog Incinerator Capacity 100kg


Basic Info.

Model NO.:non incineration medical waste treatment technolo
Export Markets:Global

Product Description

Key Attributes:  * All versions with Dual combustion chamber.  * Stainless Steel chimney/stack, long lifetime. *according to sequence * High temperature, long lifetime of incinerator.  * Free or minimum installation onsite.  * High speed, from 10kgs to 500kgs per hourto 6ton per day.  *according to order  * New Design for pet animal cremation enterprise.  * One year guarantee on incinerator and parts in stock. 

Application Scope:  1. Hospital& practice: Iatric Waste, Infectious Waste, Dressing, Bio-Waste, Medicine.  2. Slaughter House &Pet Hospital &Farm: Dead Animal, Bio-Waste.  3. Community & Sea Port & Station: Municipal Solid Waste, etc.  4. Laboratories, Remote Locations, Disaster Relief Operations, Animal Cremation 

Nanjing Clover Medical Technology Co., Ltd. is a leading waste incinerator maker in China. We’re local manufacturer and one of the greatest exporter of China. Pyrolytic incinerator gear technical is main waste treatment all of the world, for Medical Waste, the way to build a gas LPG incinerator, the way to construct portable small scale incinerators, the way to purchase a pet crematory manufacturers, the way to design and construct a medical waste incine, Animal Incineration, Pet cremation and other good wste. The potential from 10kgs/Hr. To 500kgs/Hr. Up to 6ton per day. Presentlywe provide different series for local client requirements and layout updated incinerator with our top technology. The updated design characteristic of our range of incinerators create them one of the most cost effective on the planet.

Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC)
Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour
Feed Capacity 20kg 40kg 60kg 100kg 200 kg
Control Mode PLC PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L 1200L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm
Secondary Chamber 50L 110L 180L 280L 600L
Smoke Filter Chamber Yes Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual Manual
Voltage 220V 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2
Temperature Monitor Yes Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L 200L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm
Chimney 3Meter 3Meter 5Meter 5Meter 10Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm

Incinerator Effective at dealing with in between 300 & & 500 kgs fitted Together with the wet scrubber system


Automatic filling and refilling with capability of 10 to 12 bunches daily working with gas treatment methods and gas fuel and ought to obey the European Standards.the Federal Government Healthcare Facility for Medical Waste Incinerator with all the adhering to Specifications. They are having basic wastes like plastic bottles etc, wastes originating from work camps, to be incinerated, they need, 50kg/hr incinerator
4. Gas consumption: 7 litres per set. Incinerator with the ability of treating in between 300 & & 500 kgs fitted with all the wet scrubber system.complete Burner with a power of 500kgs/ hr with a wet scrubber apparatus. A 10-20Kg per hour of residential waste? Likewise, I want to know what’s the minimum ability burner you have in instance we need some thing smaller?a Waste Incinerator of 500 Metric Tonne daily burning capability like I am in ownership of a huge amount of mixed/municipal squander (4/5 million tonnes) of the subsequent make-up (52% natural, 12% plastic, 16% newspaper, 6% metal, 4 percent glass and also 10% other). The EU codes of the waste are as complies with: 20 03 01, 19 12 10 and 19 12 12.
3. Consumption per batch: 3.2 individuals resources.


incineration Heater for burning patalogical


incineration Heater for burning patalogical (like human tissue or blood) as west

The weight of this west materials is 700 kg each month and also we require a underfloor heating system

Without fume as well as any kind of damaging gas

. INCINERATOR SPECIFICATION

# Summary Specification

1 Burning Capacity – – 400 kg/time and also must not be less than 300 kg/time. Optimum combustion time need to be 6 times/day

2 Smokeshaft external diameter – – 300 to 400 mm

3 Fan power – – Need not to exceed 1.1 kw

4 Voltage – – 220V

5 Oil ingestion – – Have not to exceed 14kg/h

6 Feeding door diagonal dimension (mm) – – Not less than 500mm 7 Incineration Temp. (⁰ C) – – 800 or above 8 Exhaust

Carbon Monoxide – – Must not go past 100 mg/m3

SO2 – – Need not to go past 400 mg/m3

HF – – (Hydrogen fluoride) Must not exceed 9.0 mg/m3

NO2 – – Shouldn’t exceed 500 mg/m3

Smoke dirt – – Need not to exceed 100 mg/m3

9 Elevation of this Burner – – less than 10m over earth level

10 Maker’s Service guarantee – – Not less than 1 year

11 Electrical Connection – – From closest flow box with 25mm2 electrical cord and also all relevant connections and circuitry


Shedding toxic waste and chimicals incinerators


Sudan

clinical waste burners designs for medical facilities of 100-300 bed as well as 100-1000bed, kindly send out cost quote of all of the YD versions

and style of bargain / shipping to nigeria

burner is for usage in the hospital for shedding toxic waste along with chimicals, minimum Ability 300 per hr.

The hospital burner for use in the health care waste as needed by global environmental administration. Minimum 300 Kg

capacity/hr, Fuel discharged, refractory lined, smokeshaft and also tasting prot. Minimum temperature of 1100 level Celsius kindly price quote

me best price for resale.The ideal cost for resale to get the involving $7000 to $12000 Usd I already have estimates just need the

ideal cost please.

3 types of incinerators, which can be 10Kgs, 20Kgs and 30Kgs for our Tawfiq Healthcare facility use at Malindi, Kenya. We are an

environmental consulting company as I’ve mentioned previously, we’ve currently contracted by a French firm focused on

the sale of solid waste burners (ATI) and we bought a crematorium for the disposal of solid waste, comprising $180

million dollars, as well as now we wish to get into company of advertising waste incinerators pet, as well as since it does not have an

agent in Saudi Arabia. The three models you have suggested are based upon 24-hour functionality. Can you please make perfect

referrals for 8-10 hour shift daily (including cooling time)? I presume we shall certainly need bigger capability incinerators for

each of the 3 requirements.I am curious to know more comprehensive demands and rates for the SYC-20 incinerator. I

remain in the marketplace for a little and easy-to-operate burner, nevertheless possess little to no experience with such things.

setup and building and construction of SOLID WASTE
MANAGEMENT COMPLEX, for that function we want Sixteen (16) ton/day (7,538 kg/day) Power Burner System.1.5 ton garbage

daily,

called for number of devices -10 to 25 amounts

Installing various type of waste Tracking systems ideally Incineration as well as others for the nation Jammu & & Kashmir India

manufacturer along with retailer of various Incinerator and additional products.

Please be kept in mind that we are a leading Bangladeshi company house working in various Medical, Surgical, Dental, Health center

products, Plant and Equipment and so forth

Essential is transformer, 220v electric engine, shortness thermocouple, Blower of Main Burner.

base upon this cellular incinerator,


Incinerator Crematory


Basic Info.

Pullution Sources:Solid Waste Processing
Processing Methods:Combustion
Export Markets:Global

Additional Info.

Trademark:clover
Origin:Nanjing

Product Description

Nanjing Clover Medical Technology Co., Ltd., local in Nanjing city, China.

Temperature Control Incinerator


Basic Info.

Export Markets:Global

Additional Info.

Trademark:CLOVER

Product Description

Key Features:  * All versions with Dual combustion room.  *based on order  * High temperature, long lifetime of incinerator.  * Free or minimum installation on site.  * High speed, from 10kgs to 500kgs per hourto 6ton per day.  *based on order  New Design for pet animal cremation business.  * One year warranty on incinerator and components in stock.

Items Specification
YDC Model YD-10C / YD-20C / YD-30C / YD-50C
Main Product List Primary Combustion Chamber
Secondary Combustion Chamber
Mix Combustion Chamber
Smoke Filter Chamber
Incinerator Common Control Case
Stainless Steel Chimney
Italy oil/gas burner: 02 units
Oil Tank (if oil fuel)