The machine provided will be made to store and to function normally under the requirements of
Chimney of 30 meters Height:
System Configuration
Maintenance Service during Warranty Period
Epoxy powder coated washable paint finish.
Average fuel consumption: ~29 kg per hour ( Or diminished )
Material: Insulation bricks confirming to international standard.
The bidder must submit diesel consumption for a daily operation of 6 hours.
The bidder must arrange for the equipment to be installed and commissioned by certified or
User (Operating) manual in English.
Power supply: 220-240 VAC, 50Hz single phase/400 — 420 VAC, 50Hz three phase as
above).
Type / Model:
Material: Refractory bricks confirming to international standard.
Modulation: Manual damper control
Type: Centrifugal
Material of Construction: Light steel.
Percent CO2 + percent CO
Temperature: Main Chamber 800 ± 50 oC, Secondary Chamber 1050 ± 50 oC.
Main Chamber:
Type: Centrifugal
It will have 3mm thick rubber lining from inside for security.
It will come with aviation , lightening arrestor, pile, drain, review platform, sampling
I.D. Fan:
Turnkey:
Installation and Commissioning
All compulsory approvals required for the installation and operation of incinerator will be performed
Insulation thickness: approx.115mm thick
Material of Construction: CRCA sheet
It will have acceptance of”Pollution Control Board” of buyer’s state.
Type: Cyclonic
Drive: Bel
Material of Construction: Stainless Steel 304, impeller and mild steel rubber lined casting
Documentation
Type: Static Solid Hearth
Parameters Concentration in mg/Nm3 (12% CO2 correction
It will have burning capability 10-15 kg/hr.
Second is a 500kg per/hr incinerator for a company planning to start a
Shall supply pump motor of suitable capacity.
Fuel Oil Storage Tank:
Destruction Efficiency: 99%.
Piping : PPR
Warranty
Fuel: Diesel
Bidder will submit detail drawings, design, and design plan of civil functions.
List of important spare Components and accessories with their part number and costing.
Scrubbing Media: Water with 5% caustic
Switches necessary for installation & commissioning of the equipment.
It will be self-supporting kind.
Burner: Monoblock fully automatic leftovers.