Technical Specifications of External SHREDDER Controls:

• Pre-programmed PLC controlled
• Password activated and reversal history indication
• Motor starter with overload protection
• Automatic instantaneous stop on hard object in shredder bed
• Automatic heavy cutting load reversal and re-try , up to three times
• Control housing Nema type 12

Cutting Hardwires:

• Chamber Dimensions(WxLxH): approx 33 c m x 38 cm x 25cm
• Number of knives: Approx 18 or to suit customer needs
• Knife Thickness: Approx 18mm or to suit customer needs
• Knife Diameter: Approx 16cm or to suit customer needs
• Tecth per Knife : minimum 3
• Number of Shafts: 2 ie double shaft shredder

Drive of the shredder:

• Must be motor driven
• Motor Horsepower : approx, 10 HP
• Motor RPM: minimum 1750
• Speed Reduction: 60:1
• Generated Torque; min 40 Nm or 350 lbs/in
• Gearbox: should be parallel shaft
• Shock protection: Rubber mount torque arm
• Power : 220vac, 1ph or 400 VAC, 3 ph or suit customer needs

Ancillaries to be included:

• Sherdder stand, fabricated from 3” sq. steel tube, standard height 30 inches
• Shredder hopper , fabricated form 16 gauge steel, with optional switched hopper lid.

(E) Features & Technical Specification of Conveyer:

To carry processed waste from vessel to shredder

Control:

• Motor starter overload protection
• Control housing Nema Type 12
• Safety pull stops along both sides of conveyor

Ancillaries:

• Conveyor stand , fabricated from 2” sq. steel tube
• Raised sidewalls fabricated form 16 gauge steel

dimension:

• Over-all length: between 20-25 feet or appropriate length depending on the installation requirement.
• Over-all width: between 24-30 inch
• over-all (without including stand) : between 12-14 inch
• Available inclines: 0-40 degrees

Belt:

• Belt Speed: 75 fi/min
• Dam spacing; approx, 16 inch

Drive:

• Motor driven
• Horsepower: Approx .075
• Motor RPM: approx.60
• Electrical power input: 220 vac. 1ph or 400 VAC, 3 ph or to suit customer needs.

(F) Technical Specification of tipper features:

• It is to be designed to allow for easy bin positioning under the door to unload processed waste and easy

inaneuverapility for lifting and tipping the waste into the shredder hopper.

• Equipment with 2 bins to accommodate processed waste loads to be loaded into the shredder and shredded waste to be

transported to the disposal bin.

• Frame: Rugged heavy duty frame constructed of formed and welded steel formed and welded steel for extra strength.
• Mast: Fabricated with channel steel for greater strength and dependability. Open structure design complete with

safety cage to offer greater visibility

• Lifting Chains: Must be dual lifting chain of roller style & must meet safety factor at least 6:1
• Hydraulic system: durable cylinder with a chrome plated ram and a relief valve for overload protection
• Forks: Heavy duty approx 4.0” wide x 42” long fixed forks.
• Platform; solid steel
• Battery: A heavy duty 12 volt, 125 amps/hour industrial strength battery.
• Overload protection plugs into any 220 VAC outlet.
• Steering: A pallet truck style steer handle for steering and approx. 4” phenolic wheels with roller bearings located

in the straddle legs.

• Brake: A hand controlled floor lock brake that secures the unit in place.

Specifications:

• Load capacity; Approx 1500 lbs
• load centre: Approx 24 inch
• Raised fork height: to suit customer needs
• Overall must height: to suit customer needs
• Lowered height: minimum 4.0 inch
• Fixed fork width: approx 7 inch
• Fork length : approx 42 inch
• Platform of approx.25”x25”
• overall width approx 25 inch
• castors: approx 5 inch phenolic
• Front wheel : approx 4 inch phenolic

1) Policy

– Waste disposal management shall be taken special note to prevent hospital infection.

– Infections wastes shall be managed, stored strictly and burned by a incinerator located at hospital site.

2) Waste Disposal Plan

1. a)Classification

– Medical wastes in hospital are classified as follows;

1. b) Infections Waste Disposal

– Segregation: Infections waste disposal shall be segregated appropriately and packed in particular containers and delivered to particular storage. The segregation, packing and delivery shall be operated appropriately at each room such as outpatient, operation theater, blood collection room and dialysis room.

– Precaution: Infections waste shall not be place in other containers on the way of segregation, packing and delivery.

– Storage: Infections waste shall be stored at the storage in hospital site temporarily until infections waste is incinerated.

– Incinerator:

It is designed to sterilize medical waste , reduce its volume , and render its components unrecognizable all in one fully enclosed and automated system.

It combines direct heated steam , high pressure and shredding to treat infectious materials.

The contaminated waste is loaded into the upper stainless steel chamber where a heavy-duty shredder reduces the waste into small pieces. Using gravity, the processed material falls into the treatment chamber where every piece is steam heated to 134 and pressurized to 3 to bar for 20 minutes. The operating conditions are continuously monitored and validated to achieve complete sterilization.

The 60 minutes average duration process cycle is totally automated. A computerized system monitors the process and automatically prints a report with the essential sterilizing parameters at the end of the cycle for accurate record keeping.

The capacity is between 500 to 600 kg/cy.h or more.

Treatment cycle:

1- Loading ; the contaminated waste is automatically -loaded into the chamber of the unit

2-Shredding; the heavy-duty shredder cut the material into small pieces and features a unique reversing system to avoid jamming

3-Heat; saturated pressurized steam raises the temperature to 134 C and the pressure to 3 bar

4-Sterilization; the sterilization comes into direct contact with the shredding material (134 c , 3 bar) for 20 minutes

5-Cooling; temperature is lowered to 80 C by spraying cool water onto Double jacket of the treatment vessel, simultaneously, the unit returns to ambient pressure

6-Draining; the steam is condensed to water and discharged with the cooling water to the sanitary sewer system

7-vacuum; the remaining residual steam is vented out through a vacuum pump

8-Unloading; a digital signal informs the operator that all safe operating conditions have been met

The condition unlocks the unit and allows gravity unloading of the treated waste into a container

Teaching Specification

General Characteristics

Product Description

Incinerator is a incineration gear, direct fire squander by gas fuel or oi fuel. As distinct circumscription, incinerator can be termed many words as under: 

Treatment capacity: Small scale incinerator, big scale incinerator and incineration pant.  Waste material: Municipal waste incinerator, medical waste incinerator, animal cremation incinerator, individual cremators  Incinerator fuel: Gas incinerator, petroleum incinerator  Waste to Energy (WTE): WTE incinerator, non-WTE incinerator  Incinerator Manufacturer: China incinerator manufacturer, UK incinerator manufacturer, USA incinerator manufacturer, India incinerator manufacturer.  Famous Incinerator manufacturer firm: Inciner8(UK), Clover Incinerator(China), Pennram (USA), Haat (India)  Burning Speed: 5kgs/hour, 10 kgs/hour, 15 kgs/hour, 20 kgs/hour, 30 kgs/hour, 50 kgs/hour, 100 kgs/hour, 150 kgs/hour, 300 kgs/hour, 500 kgs/hour 

Pyrolytic incineration technical is conventional waste treatment solution for several years. All around the planet, in most countries, people anti incinerator since the incinerator will create a large Dioxin from the smoke. Dioxins break down very slowly and past releases of dioxins from the natural and man-made resources still exist in the surroundings. Anyhow, we have to remind that, this is big scale incineration pant, normally greater than 30 ton per day. This is a societal problem, to examine and suggest ways in various angles in the general public, government, economic growth, environmental protection, technology development, etc. 

So, why we use incinerator?  First, for the medical waste from hospital, the pyrolytic incinerators is best treatment up to now. Pyrolytic technology can kill the virus, pollution management.  Secondly, for individual body, pet creature, in most countries and areas, we desire to cremation them. This is the service in the procedure for society growth, and ceremonies to commemorate the disappearance of existence. 

As previously two rationale although not only above, we still use incinerators. 

the way you are able to discover reasonable incinerator for your regional site?  Incinerator isn’t a inexpensive equipment, normally the small scale version 's cost around $5, 000USD per unit and big scale version 's cost more than $50, 000USD each unit. Thus, before buy one unit incinerator, you have to make clear following things: A, burn what? Incinerator is a incineration gear, function is fire waste. So what sort of waste you want to cure?  B, small or big? This based on the waste output daily or the waste quantity per feed period, like creature size.  C, fuel? Incinerator use gas or oil , normally, gas fuel is less expensive than oil and also the smoke cleaner than petroleum fuel model. But some neighborhood site don't have gas distribution system. Incinerator, dual chamber medical waste incinerator specifications, dual chamber waste incinerator manufacturers, economic incinerator,  And other technology items, like power(220V, 380V), waste feed doorway kind, incinerator structure, etc..

After you clarify them, you can go to locate a local or global manufacturers, asking prices, technical specifications and finally buying the correct products.

heavy Duty Steel casing

High Quality refectory lining & insulation

1 x Diesel fired ignition burners operated on / off

Front Loading Door (safety catch

Separate Ash removal Door

2.7  CONTROL UNIT

1. The entire processing cycle and the combined effect of the individual components of the incinerator shall be

achieved by a central control unit.

1. The control panel shall consist of a standardized sprayed sheet steel shell with doors and the necessary

mounting supports and contains all the devices such as relays, time switch, safety device, contactors, regulator,

display devices, recorder, selection, on, off and main switches, and indicator lamps required for the control,

regulating and registration.

Product Description

Keyword:  Small incinerators  Medical waste incinerator  Pet animal cremation incinerator  Incinerator manufacturers 

Incinerator is a incineration equipment, direct fire squander by gas fuel or oi gas. As distinct circumscription, incinerator could be termed many words as below: 

Therapy capacity: Small scale incinerator, large scale incinerator and incineration pant.  Waste material: Municipal waste incinerator, medical waste incinerator, animal cremation incinerator, human cremators  Incinerator gas: Gas incinerator, oil incinerator  Waste to Energy (WTE): WTE incinerator, non-WTE incinerator  Incinerator Manufacturer: China incinerator manufacturer, UK incinerator manufacturer, USA incinerator manufacturer, India incinerator manufacturer.  All around the planet, in most nations, people anti incinerator because the incinerator will produce a sizable Dioxin in the smoke. Dioxins could be released into the environment through forest fires, backyard burning of trash, specific industrial activities, 100kg capacity incinerator manufacturer in China, 10kg capacity incinerator, 10kgs per hour incinerator, 15 mph incinerator price, 150 kg puppy, 150kg. Net, and residue from previous business burning of waste. Dioxins break down very slowly and previous releases of dioxins from both man-made and natural resources still exist in the surroundings. Anyhow, we have to remind that, this is large scale incineration pant, normally more than 30 ton daily. This is a social problem, to examine and indicate ways in various angles in the general public, government, economic growth, environmental protection, technology development, etc. 

So, why we use incinerator?  To begin with, for your medical waste from hospital, the pyrolytic incinerators is best treatment up to now. Pyrolytic technology can ruin the virus, pollution management.  Secondly, for human body, pet creature, in most nations and regions, we want to cremation them. This is the ceremony in the procedure for society growth, and ceremonies to commemorate the disappearance of existence. 

As above two reason but not just above, we still use incinerators. 

How you can discover reasonable incinerator for your regional site?  Incinerator is not a cheap equipment, normally the little scale version 's price approximately $5, 000USD per unit and large scale version 's price more than $50, 000USD per unit. So, before buy one unit incinerator, you need to make clear after things: A, burn what? Incinerator is a incineration equipment, function is flame squander. So what kind of waste you want to cure?  B, little or large? This based on the waste output daily or the waste quantity per feed period, like creature dimensions.  C, fuel? Incinerator use oil or gas , normally, gas fuel is cheaper than oil and the smoke cleaner than oil fuel model. But some neighborhood site don't have gas supply system.  And other technology items, like electricity (220V, 380V), waste feed door kind, incinerator construction, etc. 

After you describe these, it is possible to go to discover a local or global manufacturers, requesting prices, technical specifications and finally purchasing the right products. 

Wrote by Nicky