hiclover 10kgs per hour incinerator


Smallest waste incinerator for small hospital 
average 10kgs per hour. 
with double(2) sets burner.

Equipment Technical Specifications

Model

YD-10

Feed Capacity

Average 20 kgs per feed

Burning Rate

Average 10 kgs per hour

Burning Time per Feed

2 hours

Voltage

220V

Gas

Diesel Petroleum

Burner

Italy Burner

Feed Mode

Manual

Fuel consumption (Oil)

5.4-12.6 Kgs/Hour

External Dimensions

100 x 100 x 160cm (mainbody)

Internal Dimensions

50 x 50 x 80cm(Main Chamber)

Waste combustion Room

200Liters

Article Combustion Chamber

100Liters

Oil Tank Capacity

50 Liters

Door Opening

35 x 35cm

Chimney

3.0M

Gross Weight

1000kgs

Chamber Material

Refractory Concrete

Max.

126,000Kcal/Hr.

Operation Technical Specifications

Chamber temperature

Chamber Anti-Rate

8000C -10000C

Residency time

13500C

0.5 Sec.

Burning efficiency

>98%

Waste Lower Calorific Power

HICLOVER – Medical Environmental 

3000Kcal


 

Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 


Clinical Waste ncinerators for Health center 10-500kgs per hr


Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC)
Burn Rate (Average) 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour
Feed Capacity(Average) 20kg 40kg 60kg 100kg 200 kg
Control Mode PLC PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L 1200L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm
Secondary Chamber 50L 110L 180L 280L 600L
Smoke Filter Chamber Yes Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual Manual
Voltage 220V 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2
Temperature Monitor Yes Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L 200L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm
Chimney 3Meter 3Meter 5Meter 5Meter 10Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
1st. Chamber Temperature 800–1000 800–1000 800–1000 800–1000 800–1000
2nd. Chamber Temperature 1000-1200 1000-1200 1000-1200 1000-1200 1000-1200
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm


Items/Model YD-30 YD-50 YD-100 YD-150
Burning Rate (kgs/Hour) 30 kgs/Hr. 50 kgs/Hr. 100 kgs/Hr. 150 kgs/Hr.
Feed Capacity (kgs) 60 kgs 150 kgs 200 kgs 300 kgs
Equipment Weight 2300 kgs 4000 kgs 5300 kgs 7000 kgs
Picture

Primary Chamber (Liters) 360 900 1200 1500
Secondary Chamber (Liters) 200 200 500 500
External Dimensions (cm) 145x90x175 200x160x230 220x180x360 240x170x380
Internal Dimensions (cm) 100x60x60 120x90x85 130x100x90 150x100x96
Oil Tank(Liters) 200 300 300 300
Door Opening (cm) 48 x 60 62 x 80 55 x 80 59 x 81
Chimney (M) 5 5 10 10
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Secondary Chamber  YES YES YES YES
Mix-Combustion Chamber YES YES YES YES
Smoke Filter Chamber YES YES YES YES
Combustion Fuel Oil/Gas Oil/Gas Oil/Gas Oil/Gas
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Temperature Monitoring YES YES YES YES
1st. Chmaber Temperature 800–1000 800–1000 800–1000 800–1000
2nd. Chmaber Temperature 1000-1200 1000-1200 1000-1200 1000-1200
HICLOVER – Medical Environmental 
Items/Model YD-200 YD-300 YD-500 YD-600
Burning Rate (kgs/Hour) 200 kgs/Hr. 300 kgs/Hr. 500 kgs/Hr. 600 kgs/Hr.
Feed Capacity (kgs) 400 kgs 500 kgs 800 kgs 1100 kgs
Equipment Weight 7600 kgs 8300 kgs 13000 kgs 16500 kgs
Picture

Primary Chamber (Liters) 2000 2400 4000 5500
Secondary Chamber (Liters) 500 1200 1500 1500
External Dimensions (cm) 270 x 185 x 380 260x220x420 320x220x460 360 x 220 x 475
Internal Dimensions (cm) 180 x 115 x 96 220x110x100 257x147x108 300 x 147 x 125
Oil Tank(Liters) 300 500 500 500
Door Opening (cm) 59 x 81 90 x 110 108 x 128 108 x 128
Chimney (M) 10 10 14 14
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Secondary Chamber  YES YES YES YES
Mix-Combustion Chamber YES YES YES YES
Smoke Filter Chamber YES YES YES YES
Combustion Fuel Oil/Gas Oil/Gas Oil/Gas Oil/Gas
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Temperature Monitoring YES YES YES YES
1st. Chmaber Temperature 800–1000 800–1000 800–1000 800–1000
2nd. Chmaber Temperature 1000-1200 1000-1200 1000-1200 1000-1200


 

Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-04-08


Technical Requirements for Medical Waste Incinerator


Basic Info.

Model NO.:purchase pet incinerator cremator united airlines
Export Markets:Global

Product Description

Technology Respond(FAQ) 

Q: What is kind of waste may use in this gear?  A: This gear to medical waste, pet animal, Municipal waste, reside waste. Prohibit any volatile and radiation substance, liquid gas and waste waste.  GB18484-2001. 

Q: Treatment capacity  A: Average Ability calculated by medical waste(lower calorific power (L. C. P): 3.0TH Kcal/Kg a hour), not mean any waste material. The animal/pet combustion speed around 2/3 of ordinary capacity. 

Clover incinerator use time daily to 24 hours. Between each feed/combustion time, there are about 0.5-1 hours cooling time plus time to get feeding waste. Actual combustion time per day is about 16 hours. The lifetime of incinerator between 5-10 year according to use. 

Generally, we proposal small lab, small clinic use capability under 20 kgs per hour. If incinerator use in hospital, then please calculate the waste output around 2kgs per people per day. If there are 200 sickbed in the hospital, then that's mean you need 1 incinerator capability around 400kgs per day, change to capacity per hour is approximately 30-40 kgs per hour. According the operation time per day, waste material, funding, growth, etc, you may use capacity from 30-50 kgs per hour incinerator.  *How to calculate Animal Cremation Burn Rate: 2/3 of the medical waste. 

Q: Meeting and Testing  A: We provide all documents and incinerators simple to installation and operation. Customer can send people visit our factory to learn operation and installation. Generally, we don’t send engineer to local website or even ask. The dispatch price is additional according to order. 

Q: Combustion Temperature  A: The very first combustion chamber: 800-1000 centi degree.  The next combustion chamber: 1000-1200 centi degree. 

Q: Incinerator Control Mode  A: Default Control mode is common control case. PLC mode according to model and order. 

Q: Operation and maintenance costs  A: Operation price according to fuel consumption rate and power/staff, etc. 

Annual approximately $500-$1000USD per year maintenance according model, use situation. 

One individual can service 02 device incinerators. The staff should have basic electrician knowledge to operate/inspect/maintaince incinerator/burner/blower according to operation user guider, animal crematorium gear, animal crematory bidding, creature incinerater, animal waste incinerators, cows incinerator, economical incinerator, china incinerator exporter, and know threat of medical waste to protect employee self with necessary security element. 

Q: The Residency period in combustion chamber  A: 02 sec.

Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC)
Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour
Feed Capacity 20kg 40kg 60kg 100kg 200 kg
Control Mode PLC PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L 1200L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm
Secondary Chamber 50L 110L 180L 280L 600L
Smoke Filter Chamber Yes Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual Manual
Voltage 220V 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2
Temperature Monitor Yes Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L 200L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm
Chimney 3Meter 3Meter 5Meter 5Meter 10Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm

Compounds Incinerator


Basic Info.

Pullution Sources:Solid Waste Processing
Processing Methods:Combustion
Export Markets:Global

Additional Info.

Trademark:clover

Product Description

We, Nanjing Clover Medical Technology Co., Ltd., based in China mainland.

Items/Model YD-10C YD-20C YD-30C YD-50C
Burning Rate (kgs/Hour) 10 kgs/Hr. 20 kgs/Hr. 30 kgs/Hr. 50 kgs/Hr.
Feed Capacity (kgs) 40 kgs 40 kgs 50 kgs 80 kgs
Equipment Weight 1200 kgs 1200 kgs 1800 kgs 2200 kgs
Primary Chamber (Liters) 200 200 250 400
Secondary Chamber (Liters) 140 140 140 140
External Dimensions (cm) 170x140x160 170x140x160 170x140x190 180x160x200
Internal Dimensions (cm) 55x55x65 55x55x65 55x55x85 70x70x85
Oil Tank(Liters) 50 100 100 150
Door Opening (cm) 38 x 48 38 x 48 38 x 48 45×55
Chimney (M) 5 5 5 5
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Secondary Chamber  YES YES YES YES
Mix-Combustion Chamber YES YES YES YES
Smoke Filter Chamber YES YES YES YES
Combustion Fuel Oil/Gas Oil/Gas Oil/Gas Oil/Gas
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Temperature Monitoring YES YES YES YES

Key Features:  All models with Dual combustion chamber.  * Stainless Steel chimney/stack, long lifetime. *according to sequence * High fever, long lifetime of incinerator.  * Free or minimum installation on site.  * High speed, from 10kgs to 500kgs per hourto 6ton daily.  *according to order  New Design for pet animal cremation enterprise.  * One year warranty on incinerator and components in stock.

HIGH TECH PYROLYTIC MEDICAL WASTE BURNER


NB.; Civil functions as well as any various other applicable solutions for the installation as well as training of drivers need to be contained in the burner’s rate.

Requirements for the shelter of the burner:

House of the incinerator comprehensive in deal (your home should have toilet as well as hand washing centers as well as firefighting). The size of the shelter shall quantify 4 meter by six meter and will be provided with appropriate air ventilation.

This substance as well as equipment should include at the drop of the burner: foundation in debris stone, isolation roof covering versus humudity; elevation together with block of 20 centimeters (bloc concrete), continuing lintel (linteau) in strengthened concrete; steel frame (charpente en alloy ); roofing covering in sheet B.C.A. 28 BG

25. The technical training of drivers will need to be supplied and provided by a professional from the.
> Nature: Calcium silicate.
6. The incinerator has to avoid the launch of black smoke as well as fine dust, (Smokeless) throughout the.
8. It should be able to hold exhaust at the next burn with gas residence of not much less than two seconds.
* A timer with adjustable temporization for the coverage of every heater.
– The Temperature levels of combustion: Minimum will be 850 ° C as well as maximum 1400 ° C. – Message combustion: > 1100 ° C.
Temperature outside sheet steel.
Control box watertight to grime, such as:.
Ought to be Automatic or hand-operated put de ashing. Refine Filtering system: Scruber to be mentionned as optional

23. Discharge Standards Compliance: BS 3316 or comparable conventional

23. Ability to treat Plastic: Not less than 40% by weight

24. The provider should give sets of additional parts of very first necessity as well as consumable of these.
Having a high substance of aluminum and shields blocks in order to make sure a minimum.
* A regulatory authority with watch for the temperature of postcombustion.
Carried out by valves as well as following the constraint of the automatic cycle. Controls as well as guidelines:.
valve.
* An extra shot of air to be sure excellent oxygen web content.

19. A control box which makes certain the whole cycle of combustion. Fan:.
* A regulator with watch to your temperature level of combustion,.
>> Thickness: > 85 mm.
5.
* Perfectly tight doorway to the hand-operated loading of waste. The loading ought to be Guidebook, Place.
* Plate of burning Carborundum, preventing the dealing with glass as well as slags.

18. A chamber of post burning of gases.
* Carcass in strong sheet steel with help of link.
10. The lower volt electricity (L.C.P) of this waste will surely be 3,500 kcal/kg.
incinerator. The installed burner has to birth a 1 year warranty.
> Thickness: > 100 mm “.
>> Character: 65% of A1203.
14. Heater procedure need to be Automatic On/Off.
– Protect in fibrous panels.
* A gadget of shot air allowing a entire recombustion of gases,.
Private centers, research labs, institutes, etc…….
2. It should Be Able to operate not less than 10 hours/day

22. The supplier should give sets of extra parts of very first necessity as well as consumable of the.
incinerator.

23. The installed burner has to birth a one year warranty.
24. The supplier will perforn an onsite installation of the burner.

25. The technical training of drivers will need to be provided and also provided by a professional from the.
manufacturing facility; it will certainly consist of medicinal as well as precautionary maintenance, and making use of equipment, etc

NB.; Civil works as well as any various other relevant solutions for the installment as well as training of drivers need to be included in the burner’s rate.

Requirements for the shelter of the burner:

House of the incinerator comprehensive in deal (your house must have toilet as well as hand washing centers and also firefighting). The dimension of the shelter shall measure 4 meter by six meter and shall be offered with appropriate air ventilation.

This material as well as equipment must include in the shed of the burner: foundation in debris rock, isolation roof covering versus humudity; elevation with block of 20 centimeters (bloc concrete), continuing lintel (linteau) in strengthened concrete; steel framework (charpente en metal); roof covering in sheet B.C.A. 28 BG


Medical Burner Manufacturers at Supply all set for delivery


Medical Waste Incinerators in Stock. Twitter: https://twitter.com/hiclovercom Phone/WhatsApp/Wechat: +8613813931455, Web: www.hiclover.com Web: www.clover-incinerator.com

Double Combustion Chamber,Double Italy Burner,Smoke Filter Included,Burning Rate: 50-200kgs per hour optional,Primary Combustion Chamber: 1.57M3(1570Liters),Incinerator Mainbody steel: 8mm thickness,Paint for outside face: 800°C Rate,Chamber Material: High Alumina Fire Brick Wall, 1750℃ Rate,Idea for campsite average or below 600 people,Chimney: 10 Meters, Stainless steel…

Items/Model

TS150( PLC)

Picture

Idea

Waste Incineration Treatment

Melt Rate

Typical 150 kg/hour

*( 50/100/200kgs/ hour optional)

Feed Capability

Requirement 750kg/feeding

Control Establishing

PLC( Programmable Logic Controller Incinerator)

Text Steel

8mm density

Chamber Product

High Alumina Fire Block Wall Surface, 1750 ℃ Cost

Paint for outdoors experience

800 ° C Price

Burning Chamber

1570L

Internal Dimensions

150x100x105cm

Second Chamber

750L

Smoke Filter Chamber

Yes

Feed Establishing

Guide

Voltage

210/230V 50/60Hz

Electricity

0.9 Kw

Oil Intake (kg/hour)

Ordinary 20.4-28.0( D.O)

Gas Intake (m3/hour)

***

Infection Degree Present

Digital Display

Temperature Level Safety

Yes

Oil Container

300L

Feed Door

80x60cm

Smokeshaft

10Meter

Smokeshaft Kind

Stainless-steel

1st. Chamber Temperature Level Degree

800 ℃– – -1000 ℃

2nd. Chamber Temperature

1000 ℃ -1200 ℃

Residency Time

2.0 Sec.

Gross Weight

8500kg

Exterior Measurements

HICLOVER – Medical Environmental 

300x160x280cm( without smokeshaft)


 

Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-04-10


An Unexpected Ebola Infrastructure Problem: Waste


Patients for this debilitating virus create 440 gallons of medical waste every day, including instruments, dresses, gloves, body fluids, sheets, mattresses and much more. That is a substantial number of medical waste in any circumstance, but it is particularly daunting in this case because it ought to be disposed of extremely carefully, to avoid the chance of spreading infection. What do you do with a problem such as Ebola waste? Because you don’t want to toss it in the garbage.

Somewhat surprisingly, states Bausch, the United States actually faces bigger problems in regards to safely disposing of Ebola waste, which can be only burned in large pits in Africa:”In the United States, naturally, we’re somewhat beholden to higher tech solutions, which in some ways are a tiny bit more problematic in terms of handling all that waste, and we need autoclaves or incinerators that can handle that type of thing. It’s not the actual inactivation that’s particularly difficult; it is just the process of finding the waste out of, of course, that the frontline of care and interaction with the patients safely to the location where it can be incinerated or autoclaved.”

The problem in the United States is ironically compounded by the increased accessibility to healthcare, and the high quality of healthcare services, available. In the United States, patients have been treated by medical teams with access to a massive volume of equipment they use for protection, including masks, gowns, booties, and gloves, along with sanitizers and other tools. Moreover, patients get extensive medical interventions that create waste such as tubing, needles, medical tape, empty IV bags, and much more. The care that has helped the majority of the number of Ebola patients in the United States conquer the disease has contributed to the huge quantity of waste generated, highlighting a critical hole in U.S. medical infrastructure — although African American hospitals may have lacked the staff and supplies required to provide aid to Ebola patients, they are at least prepared to handle the waste.

The CDC just issued guidelines to help clinicians and administrators decide upon how to handle Ebola squander, but The New York Times notes that lots of facilities do not have the autoclave, and incinerator, capacity to handle medical waste on this scale. Some countries prohibit the burning of medical waste entirely, or have barred incineration of Ebola waste, leading to the transport of waste across state boundaries to facilities that can handle it, which introduces its own dangers; with every mile added to transport, there is a greater danger of spreading disease to previously unexposed communities.

Astonishingly, defenders of burning the garbage come in surprising corners. When you are dealing with pathogenic and biological hazards, occasionally the safest thing to do is combustion.” Fears about Ebola, rather than real ecological or public health concerns, are forcing the decision to push incineration of ebola squander in several areas, but the United States will have to face reality: The mounting waste that accumulates in facilities where Ebola patients get treatments has to be disposed of safely, safely and immediately.

The argument in defense of incineration can be bolstered by the fact that medical waste companies specialize in high-efficiency incineration with equipment designed to minimize and trap byproducts of combustion, reducing overall pollution considerably. Fears about Ebola, rather than genuine environmental or public health concerns, are driving the decision to push against incineration of ebola waste in many regions, but eventually, the United States is going to have to face facts: The mounting waste that accumulates in facilities where Ebola patients receive treatments needs to be disposed of safely, and promptly.

 

by: http://www.care2.com/causes/an-unexpected-ebola-infrastructure-problem-waste.html