U.S. needs to rethink Ebola infection controls, says CDC chief

A member of the CG Environmental HazMat team disinfects the entrance to the residence of a health worker at the Texas Health Presbyterian Hospital who has contracted Ebola in Dallas
Medical experts need to rethink how highly infectious diseases are handled in the United States, a U.S. health official said on Monday, after a Dallas nurse contracted Ebola despite wearing protective gear while caring for a dying Liberian patient.

As an outbreak of the deadly virus spread beyond West Africa, hospitals and nursing associations across the United States were taking a closer look at how prepared they were to handle such infections.

“We have to rethink the way we address Ebola infection control. Even a single infection is unacceptable,” Dr. Thomas Frieden, director of the U.S. Centers for Disease Control and Prevention, told reporters. “The care of Ebola is hard. We’re working to make it safer and easier.”

Frieden said health authorities are still investigating how the nurse became infected while caring for Thomas Eric Duncan in an isolation ward at Texas Health Presbyterian Hospital.

Duncan died last week and the nurse is the first person to contract the virus on U.S. soil, taking concerns about containing its spread to new heights.

The infected nurse is Nina Pham, 26, according to a Sunday school teacher at the church where her family worships and through a public records check of her address. Attempts to reach her family were not immediately successful.

The family was in shock when it learned the young woman had contracted Ebola, said Tom Ha, a close friend of the Pham family who is also a Bible studies teacher at the Our Lady of Fatima Catholic Church in Fort Worth.

“The mother was crying, very upset,” he told Reuters.

The Dallas nurse is “clinically stable,” Frieden said, and the CDC is monitoring others involved in Duncan’s care in case they show symptoms of the virus.

Frieden also apologized for remarks on Sunday, when the nurse’s infection was first disclosed, that suggested she was responsible for a breach in protocols that exposed her to the virus. Some healthcare experts said the comments failed to address deep gaps in training hospital staff to deal with Ebola. [ID:nL2N0S8014]

“I’m sorry if that was the impression given,” Frieden said. He said the agency would take steps to increase the awareness of Ebola at the nation’s hospitals and training for staff.

The Texas Nurses Association defended Pham in a statement, saying it was wrong to assume the nurse was to blame.

“The facts are not known about how the nurse in Dallas was exposed,” the association stated. “It is incorrect to assume that the nurse failed to follow protocols.”

At his news conference, Frieden said some changes in procedures had already been put into effect, including having staff monitor those putting on and taking off protective gear, and retraining staff on how to do so safely.

He said other steps were being considered including new types of protective clothing and possibly spraying down staff with solutions that could kill the virus if someone were to become contaminated.

Dr. Anthony Fauci, director of the National Institute of Allergy and Infectious Diseases, said in an interview with ABC that officials should consider sending Ebola patients only to a few “containment” hospitals.

President Barack Obama was briefed by Frieden and senior members of the administration about the second Dallas case and stressed that “lessons learned” from the CDC’s investigation should be shared with hospitals and healthcare workers across the country, the White House said.

Obama also spoke separately with U.N. Secretary General Ban Ki-Moon and with French President Francois Hollande about international efforts to contain the outbreak and to provide treatment centers in affected African nations.

A brief scare at Boston’s Logan International Airport caused emergency crews in protective gear to remove five passengers with flu-like symptoms from Emirates flight 237 from Dubai, but the CDC later said there was no Ebola threat.

EBOLA WASTE A CONCERN

Meanwhile, Louisiana’s top law enforcement official said he was granted a temporary restraining order to prevent the personal items of Duncan, who died on Wednesday, from being buried in a local landfill after being incinerated.

Louisiana Attorney General Buddy Caldwell said material collected from Duncan and the Dallas apartment where he was staying was taken to Port Arthur, Texas, on Friday to be incinerated. From there the incinerated material was to have gone to a hazardous waste landfill in Louisiana.

“There are too many unknowns at this point, and it is absurd to transport potentially hazardous Ebola waste across state lines,” Caldwell said in a statement after the restraining order was granted.

According to CDC guidelines, the Ebola virus does not survive on materials that have been incinerated.

The current Ebola outbreak is the worst on record and has killed more than 4,000 people, mostly in West Africa’s Liberia, Sierra Leone and Guinea. Duncan, a Liberian, was exposed to Ebola in his home country and developed the disease while visiting the United States.

Ebola, which can cause fever, vomiting and diarrhea, spreads through contact with bodily fluids such as blood or saliva.

The infection of the Dallas nurse is the second known to have occurred outside West Africa since the outbreak that began in March. It follows that of a nurse’s aide in Spain who helped treat a missionary from Sierra Leone, who died of the virus.

Officials said Pham’s pet dog, a 1-year-old King Charles Spaniel, would be kept safe while its owner was in the hospital. That contrasts with the dog of the health worker in Spain that was euthanized out of fear the animal could spread the disease, prompting protests from animal rights activists.

(Additional reporting by Julie Steenhuysen in Chicago, Jonathan Kaminsky in New Orleans, Marice Richter in Dallas and Roberta Rampton in Washington; Writing by Jon Herskovitz and Ken Wills; Editing by Michele Gershberg and Lisa Shumaker; Editing by Andrew Hay and Tom Brown)

FILED UNDER:

U.S.

Health

animal crematory equipment


  1. ii) The visual alarm must be specific to the problem and remain on until the alarm condition is corrected; it should

not be possible to turn off the visual alarm.

 

  1. i) Construction Quality
  2. i) The unit should have no sharp edges.
  3. ii) All external components should be securely mounted.

iii) The unit should be secure and provide adequate protection against moving and electrically energized parts.

  1. iv) The unit should be well constructed with durable materials to withstand typical abuse and cleaning.
  2. v) Switches, knobs, and other controls should be designed for conditions of heavy use.
  3. vi) Wiring and tubing should be neatly arranged and bundled, if appropriate. vii) Mechanical, electric, and pneumatic

terminators, connectors, sockets, and

solder joints should be designed to prevent fluid penetration, incorrect connections, and mismating of fitting and

couplings.

viii)Connections should be secure to resist accidental disconnection and should maintain sterility, when appropriate.


incinerator for medical waste


Lifting Chains: Must be dual lifting chain of roller style & must meet safety factor at least 6:1.

Hydraulic System: Durable cylinder with a chrome plated ram and a relief valve for overload protection

Forks: Heavy duty steel approx. 4.0” wide x 42” long fixed forks

Platform: solid steel

Battery: A heavy duty 12 volt, 125 amps/hour industrial strength battery.

Battery Charger: Must be built-in battery charger, rectifier type with transformer, circuit breaker and overload

protection plugs into any 220VAC outlet.

Steering: A pallet truck style steer handle for easy maneuverability.

Wheels: approx. 5” phenolic rear casters for steering and approx. 4 “ phenolic wheels with roller bearings located

in the straddle legs.

Brake: A hand controlled floor lock brake that secures the until in place.

Specifications:

Load capacity: approx 1,500 Ibs

Load centre: approx 24 inch

Raised fork height : to suit customer needs

Overall mast height : to suit customer needs

Lowered height: minimum 4.0 inch

Fixed fork width: approx 7 inch

Fork length: approx 42 inch

Platform of approx. 25” x 25 “

Overall width approx 25 inch

Castors: approx 5 inch phenolic

Front wheel: approx 4 inch phenolic

(G)Technical Specification of Spore tester

Features and Specifications

It is an Auto-reader for Bacillus Stearothermophilus to test the spore in the discharge after treatment

(Sterilization) of the waste.

Should be a very Accurate, reliable and easy-to –use  units for reading Rapid Readout Biological Indicators (RRBI)

for Steam Sterilizer

Automatically reads indicator results.

There should be a red plus (+) light to indicate sterilization failure and a green negative (-) light to confirm that

the sterilization conditions have been met.

Available alarm in case of positive detected and RRBI is removed from the reader before final results have been

detected.

There should also be a Buzzer alarm OFF button.

The unit should be maintenance-free equipment and there should not be any light bulbs to replace for maintenance.

At least 12 Incubation/reader wells

A crushing well

Digital display

A Press-button by pressing which, the incubation time remaining for each individual incubation/reader well that

contains a RRBI will be displayed.

Power: 220 VAC , 50Hz

Accessories to be included

Samples/kits-100 pcs

Documents to be submitted as follows-

Fabricators accreditations

Test Report to prove ZERO harmful emission level provided as samples from other installations

Test report to prove sterility achieved at 6log10 level to be provided upon commissioning report and validation

Technical proposal must include:

The hospital should provide the necessary space; building & infrastructure; Sufficient Power, steam supply and

connection up to room; water & Sewage line to the room.

Room Preparation: Preparation, Renovation & Modification of the room is suppliers responsibility

The supplier should submit the necessary drawing(s) showing space requirement (room size  (L x W x H ) , dimensions

of processors & ancillary equipment.

Supplier must give the proposal of the total power requirement of the whole until and on which the hospital will

ensure the power supply. However, connections  inside the room is suppliers responsibility

The connection/fittings from the processor and ancillary equipment to water and sewage line is suppliers

responsibility

A detailed training proposal including the duration of staff training on how to operate and maintain the processor.

A detailed maintenance schedule.

List of Spare parts and accessories required for maintenance of the system

Warranty & After Sales Services:

Warranty period will be minimum 03 (three) years or as offered by the manufacturer which comes later.

Warranty period will be counted from the date of handing over of machine to the user in functioning condition i.e.

date of commission

In warranty period the supplier have to provide all maintenance & repair services.

Brach time will not be counted in warranty period.

At last 10 year back up services (including warranty period ) has to be ensured by the supplier.

The repair/maintenance work should be carried out within 72 hours after getting request for such from the user.

Quality Standard: CE/FDA certificate of the offered item must be submitted with the offer

For verification of the certificate bidder must submit the followings:-

i)Mailing Address of the issuer of the certificate

ii)Web-site, e-mail address & Fax & Telephone Number of the issuer

The bid will be non-responsive if:-

i)The certificate issuer cannot be reached

ii)The issuer fails to authentic the certificate within the bid validity

iii)The issuer confirms that the submitted certificate is defective in terms of authenticity or validity.

Failure to establish the authenticity  of the certificate the bidder is liable to render the bid non-responsive and

the bidder open to action in the line with applicable regulations and act.

oOriginal catalogue must be submitted

oOriginal data sheet must be submitted.


install a diesel discharged heater



blaze primarily drugs (all type of dosage kinds … … … … syrups, tablet computers, injectables) clinical consummabables, in addition to also biological liquids ……… ….
Capacity around 10 kg/ hr. set up a diesel discharged burner that can fit a collection tons of about 100 kg with an everyday burning requirement of approximately 500kg per 8 hour day. Industrial Burner to harm.
the drugs waste like Alu, PVC, PVDC etc.Installation for burning of pet dog waste cost, existence, settlement terms where it is feasible to acquire in Russia? I am aiming to for ability in between 200 -400 kg.
1.2 AREA PAINT.
Perform painting needed for area not or else specified, and also surface paint of things just keyed at the factory

1.3 LOCATION TRAINING.
a. Submit [6] complete duplicates of operating guidelines laying out the detailed procedures needed for system start-up, operation and also closure. Consist of in guidelines the supplier’s name, version number, service guidebook, parts noting, as well as quick recap of all tools in addition to their typical operating attributes. As well as additionally [Six] complete duplicates of maintenance instructions giving regular maintenance therapies, feasible break downs and additionally fix solutions, repairing guides, in addition to streamlined schematic representations for the system as set up.

3.6. Effectiveness.
Preheat the incinerator for 4 hrs to get to the shooting temperature of 982degrees C [1800] degrees F. Weigh and also tape the general fee weight. Charge the burner at the rated burning capability in kg extra pounds per hour for a period of [4] hrs in addition to run according to the manufacturer’s written guidelines. Contain in performance testing the treatment of the mechanical billing facilities, the burner, the air contamination control tools, the ash.
Carry out testing complete scale for a full- procedure cycle, and likewise keep an eye on performance to validate compliance with the arrangement requires send a record on security outcomes. After the burner has really cooled down, think about the residue. The weight of the deposit will not go past 5.0 percent combustible product of the total charge weight.
After clean-out, the burner will let down any kind of type of evidence of wear and tear, such as shagged or spilling refractory, bending of components, along with stained outside paint.

– – Control.
Test the incinerator under genuine shooting troubles. Validate with testing that all controls run within the optimum as well as minimum restrictions for temperature or timing. Mimic genuine high-risk issues such as warms as well as likewise fire failure by reducing the configurations for the activation of limitation as well as security controls.

– – Treatment Temperature.
Operate the burner under typical lots troubles for not much less than 6 hours. – – Gas syetem: Double gas( both oil as well as likewise gas)



Mobile Containerized Waste Incinerators HICLOVER CA-200


Mobile Containerized Waste Incinerators pets or human cremation emergency use


{
(adsbygoogle = window.adsbygoogle || []).push({});|}

Design

CA-200

Photo

Burning Rate


Common 100 kgs/hour

Key Burning Chamber

2000 Liters

Secondly Burning Smokeshaft

Yes

Feed Establishing

Hand-operated

Voltage

220V

Power

3.0 Kw

Gas Kind

Diesel Oil

Heater

Italy Original

Oil Usage (Diesel Oil)

Typical 53 kg/hour

Interior Measurements

200 x 100 x 100cm (main chamber)

External Dimensions

290 x 200 x 170cm (key space )

Temperature Degree Screen

Yes

Oil Storage Tank Capacity( if petroleum gasoline )

500 Liters

Door Opening

90 x 90cm

Smokeshaft Size

5.0 Meters

Chimney Kind

Stainless-steel

Tools Gross Weight

9000 kgs( with container)

Procedure Technical Specs

Paimary Chamber Temperature

800 ℃–– – – 1000 ℃

Additional Chamber Temperature

1000 ℃ -1200 ℃

Residency Time

2.0 Sec.

Burning Efficiency

> 98 percent

Waste Lower Calorific Power

3000Kcal

2020-06-27

(adsbygoogle = window.adsbygoogle || []).push({});


HICLOVER – Medical Environmental 


 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 


Refractory Concrete Burner


•             Using diesel as fuel

•             Capacity 50kg per hour

•             chambers material: Refractory Concrete

•             Number of chambers: 2

•             Manual feed

solicito un horno crematorio para mascotas, de una capacidad de 80 kl, aprox. Royal una unidad, especificaciones tecnicas, totalmente industrial, atte. erika martinez peru

two medical waste incinerators model YD-50, 150 kg feed capability, 220/380 V, 50 Hz c/w 5 mtr. chimney.
(adsbygoogle = window.adsbygoogle || []).push({});{
(adsbygoogle = window.adsbygoogle || []).push({});|}

Disinfecting/sterilizing the contaminated medical wastes, main combustion chamber, post combustion chamber, heat exchanger, ash removal units and flue gas treatment methods, with the following details:

Hourly capacity of this system:           from 250 up to 500 Kgs/ hour

Duration of operation:                        by 14 up to 18 hrsdaily

Fuel type to be used:                         Diesel or other

Calorific value of this waste:               3500 up to the maximum limitation kcal/ Kg

Minimum operating temperature of primary space: 1000 degrees celcius


INCINERATEUR BURNING DAMAGES OF MEDICAL WASTE PYROLYTIC Along With LABORATORY



Usage diesel, construction in repainted steel resistant aluminium at heats up, fire device control indication, billing indicator, temperature level control gadget, melting ability of 250 kg/ hr in 2 phases (2nd and primary electronic camera).
INCINERATEUR BURNING DEVASTATION OF MEDICAL WASTE PYROLYTIC AND ALSO LABORATORY.
1. CAPABILITY OF GARBAGE DISPOSAL: 50à60 kg/ h.
2. CAPACITY OF PROCEDURE WITHOUT PREVENTING: 10h.
3. SUITABLE FOR WASTE CATEGORIES A, B, C, D In Addition To E MEDICAL WASTE BY UNEP In Addition To THAT.
4. BURNING “PYROLYSIS” by regulating the waste gasification.
5. CALORIFIC LOWER (LCP) WASTE OF THESE NECESSITY BE OF 3500 KCAL/ H. a burner with filling up indication, temperature level control features and with 2 chambers (key as well as added).
6. TEMPERATURE LEVEL MAX 1400oC DESTRUCTION.
7. MINUTES TEMPERATURE LEVELS OF DESTRUCTION 850oC.
8. LOSING AREA NUMBER: 2 (PRIMARY Along With SECONDARY).
9. VOLUME CHAMBER: 1200L.
10. MEASUREMENT OF THE LOADING DOOR: 70CMX70CM.
11. GAS KIND: DIESEL.
12. POWER SUPPLY: 220 V/ 380 V.
13. SMOKESHAFT ELEVATION: 40 CENTIMETERS.
14. BURNER.
15. VANTILLATEUR BLOCK.
16. BOX CONTROL AND ALSO REGULATION.Diesel medical waste burner made from steel painted in light weight aluminum.
along with resistente to heats, device indication for fire.
control, packing indicator, temperature level control device, burning.
ability of 250Kg/ 10 hrs in 2 phases (key chamber and also.
added chamber.one should burn 50Kg/hr an added 600Kg/hr and an extra, 1000Kg/hr. I have actually visited your internet site as well as would love to ask the adhering to questions:.
1. Are these units sustained by gas?
2. Do the devices ship absolutely created or in products?
3. Are smoke stacks consisted of?
4. Can the systems be established within a city area or should they be outside city restrictions?
5. What flooring area does each system call for?
6. What sort of enclosure is required?
7. What is the normal gas consumption for every device?