Author Archives: africa-incinerator

Medical Waste Incinerator Diesel

Posted on by


Basic Info.

Model NO.:medical waste incinerator manufacturer
Export Markets:Global

Product Description

YDC incinerator is newest layout for waste treatment, include medical waste, animal cremation and other solid waste. This equipment quality structural for kinds of website, like hospital, incinerator for solid waste, incinerator furnace, incinerator furnaces for pet cremation, incinerator gas burner, incinerator hazardous waste china, environmental department, animal cremation agencies, etc.. CLOVER Incinerator provide updated models with double combustion chamber, mix combustion chamber and smoke filter chamber using refractory lines, and the combustion chamber temperature up to 1200 deg C.

Items Specification
YDC Model YD-10C / YD-20C / YD-30C / YD-50C
Main Product List Primary Combustion Chamber
Secondary Combustion Chamber
Mix Combustion Chamber
Smoke Filter Chamber
Incinerator Common Control Case
Stainless Steel Chimney
Italy oil/gas burner: 02 units
Oil Tank (if oil fuel)

Infectious Waste Incinerators

Posted on by


Basic Info.

Export Markets:Global

Additional Info.

Trademark:nanjing clover
Origin:Nanjing Cn

Product Description

Key Features:  * All models with Dual combustion chamber.  * Stainless Steel chimney/stack, long life. *according to order  * High temperature, long life of incinerator.  * Free or minimal installation on site.  * High burn rate, from 10kgs to 500kgs per hourto 6ton daily.  * PLC Control Plane. *according to purchase * New Design for pet animal cremation business.  * One year guarantee on incinerator and parts in stock. 

Program Scope:  1. Hospital& practice: Iatric Waste, Infectious Waste, Dressing, Bio-Waste, Medicine.  2. 3. Laboratories, Remote Locations, Disaster Relief Operations, Animal Cremation

Norfolk incinerator bill wrangle could Last until after Christmas

Posted on by


But in a meeting this week, Tom McCabe, interim manager of environment, transport and development in Norfolk County Council, told councillors that the last figure had yet to be agreed.

He said:”The conversation with Cory Wheelabrator is ongoing and we’d hope to have it resolved by Christmas.

“It is premature to say it’ll be done by then, though. It could be achieved before that it could drag on for more.”

Norfolk County Council voted by 48 votes to 30 to complete the contract to the proposed incinerator in Saddlebow in an extraordinary meeting in April.

Council officers had stated that, because of delays in securing planning permission, the contentious project no longer provided good value for money, and councillors agreed to ditch it. That comprised #20.3m to Cory Wheelabrator – the firm which would have built and run the burner; people inquiry costs of #1.6m and estimated interest related expenses of #11.8m.

The first #11.8m of this bill was paid in July, however council bosses are locked in months of discussions regarding the fine details of this contract and just how much that means that the council must pay Cory Wheelabrator.
By: http://www.edp24.co.uk/news/politics/norfolk_incinerator_bill_wrangle_could_continue_until_after_christmas_1_3823390

However, in the short term, a deal was struck by their counterparts in Suffolk for rubbish to be burned at a newly-built incinerator at Great Blakenham.

Over the following year, about 40,000 tonnes of Norfolk’s residual household waste will be hauled down the A140 to be burned at the plant.

• What do you consider this incinerator saga?

• What do you think of the incinerator saga? Write, giving full contact details, to Letters Editor, Prospect House, Rouen Road, Norwich NR1 1RE.
by: http://www.edp24.co.uk/news/politics/norfolk_incinerator_bill_wrangle_could_continue_until_after_christmas_1_3823390


How to Buy Clover Incinerators

Posted on by

1. Clover Medical save all rights to mend/update product information on website. The specifications are subject to change without prior notice.

2. We accept business term: FOB/C&F/CIF term, by sea/train, full container or bulk goods. 1. FOB (Free on Board), the price leave China port. 2. C&F (Cost and Freight), FOB price and freight cost. 3. CIF (Cost and Insurance and Freight), FOB price and insurance fee and freight cost.

3. Payment Term:
By sea: 50% deposit T/T (bank transfer) in advance, and 50% balance T/T before shipping day.
By Train: 100% T/T in advance.

4.Shipping Document & Packing: Generally, We supply (1)Bill of Lading (Way Bill), (2)Commercial Invoice, (3)Packing List ONLY.
If any further documents/certification and label print/words on packing material or documents which request by importer or local customs, whatever happen in China or oversea, should inform seller in advance and charge as actual cost. For example, Fumigation Certification, embassy certificate, BV/SGS…inspection, certificate of original (C/O), Form A, etc. Buyer must to inform seller in advance and pay these cost. Seller save all rights to postpone/cancel shipping and request lost cost cause this incident. If the importer local customs arrest/request penalty or other situation caused by buyer mistake, Clover Medical save all right to request compensation/litigation. Thanks for your cooperation.

5. The leading time is mostly 3-6 weeks, depending on the products and quantity.

7. Guarantee: One year for the equipment. We supply spare parts for maintenance, free charge within the first year and the delivery charge is on the buyer.

8. Insurance: Bear all risks of loss of or damage to the goods from the time they have passed the ship’s rail at the named port of shipment. we proposal apply All Risks insurance under each contract. When buyer pickup goods at local site, must inspect carefully. If any damage happened under insurance policy, buyer should inform insurance company and Clover Medical Limited immediately. We will provide necessary assistance.

tiny range scientific waste burner

Posted on by



Hazardous as well as likewise hazardous wastes,
Medical pharmaceutical along with pleasant fluids Wastes
Residential trash
Electric as well as electronic wastes
Hazardous waste
Generally, all kind of wastes and also rubbishes
Ability 50-60Kg/ h

Combustion sustaining materials
Coal oil, diesel oil

Temperature degree inside
800-10000C

1000-12000C

Burning performance
＞ 98%

Power intake
1.3 KW

Sound
＜ 78dB

Index of let smoke as well as waste gas
Ringelman’s smoke index ＜ level 1

Smoke focus
Oil
45.5

（ mg/m3 ）.
Gas.
25.5

（ mg/m3 ）

SO.
Oil.
0.176.
Gas.
0.065

NOX.
Oil.
0.031.
Gas.
0.038

H2S.
Oil.
0.016.
Gas.
0.008

CO
.
Oil. 8.32.
Gas.
35.64

tiny scale clinical waste burner Demands.
Additionally eruptive as well as fireproof products not confessed

Refine way.
2 shedding storage rooms (wetness drying, warm dirt elimination)

Burning/ Heater.
Top quality made in Italy

Blower.
High quality made in China

Control Electrical.
High quality made in China

Ability 50 Kg/h

Performance Voltage.
220 V

Power.
1000 W

Applied For.
200 beds

Input Style.
Hands-on

Medical Burner, 24 kg/hr.
Clinical Heater, 24 kg/hr including panel board, regulates in addition to accessories.
Heating unit entry.
Chimney.
Blower.
Combustion heater

Medical Incinerator, 12 kg/hr.
Medical Heater, 12 kg/hr including panel board, controls as well as also devices.
Heater portal.
Smokeshaft.
Blower.
Burning burner

Medical Incinerator, 6 kg/hr.
Clinical Heater, 6 kg/hr including panel board, regulates in addition to tools.
Heater entrance.
Chimney.
Blower.
Burning heating unit



china heater distributor and also exporter

Posted on by



Primary Burning Chamber
Waste Charging Door: Given with refractory cellular lining with securing gaskets
Ash Eliminated Door: Supplied with refractory cellular lining with sealing gaskets
Exterior Body MOC: Mild Steel, 5mm
Main Chamber: Stainless-steel
Running Temperature degree:800. ± 50 ◦ C.
Insulation: Insulation Block.
Burner Kind: Kanthal Al High Quality.
Power Use: 75 KW (Initial Lots ).
Electric Supply:3 Phase 440 Volt.
Control board.
MOC: Mild Steel Power Coated.
No. of Temperature: Controllers: 2 Nos.
Information: The Control Panel will certainly be offered with contract as relays, switches, indicators and more. Operative on 3 phase.
I.D.Fan.
Kind: Centrifugal Kind.
MOC: Mild Steel.
Capacity:2 HP/3Phase.
Make of Electric Motor: Kirloskar/ Havells/Crompton.
Burning Air Follower.
Type: Centrifugal Kind.
Capability: 1HP/3Phase.
Make from Electric Motor: Kirloskar/ Havells/Crompton



Process Engineering Design of Pathological Waste Incinerator

Posted on by


Basic Info.

Model NO.:small medical waste incinerator manufacturers
Export Markets:Global

Product Description

Technology Respond(FAQ) 

Q: What is kind of waste can utilize within this equipment?  A: This equipment for medical waste, pet creature, Municipal waste, live squander. Prohibit any explosive and radiation substance, liquid waste and gas waste. 

Q: Incinerator Smoke Standard  A: China Government Standard: No. GB18484-2001. 

Q: Treatment capacity  A: Typical Capacity calculated by medical waste(lower calorific power (L. C. P): 3.0TH Kcal/Kg per hour)doesn’t mean any waste material. The animal/pet combustion rate around 2/3 of average power. 

Clover incinerator utilize time per day up to 24 hours. Between every feed/combustion time, there are about 0.5-1 hours cooling time and time for feeding squander. Actual combustion time per day is about 16 hours. The lifetime of incinerator involving 5-10 year based on usage. 

Ordinarily, we proposition small laboratory, small clinic use capability under 20 kgs per hour. If incinerator use in hospital, then please compute the waste output capacity around 2kgs per people every day. If there are 200 sickbed at the clinic, that's mean you need one incinerator capability around 400kgs per day, change to power per hour is around 30-40 kgs per hour. According the performance time every day, waste material, funding, development, etc, you can use capacity from 30-50 kgs each hour incinerator.  *How to compute Animal Cremation Burn Rate: 2/3 of this medical waste. 

Q: Assembly and Testing  A: We supply all files and incinerators easy to setup and functionality. Customer can send people visit our factory to learn operation and installation. Generally, We do not send engineer to local site if not request. The dispatch price is extra based on order. 

Q: Combustion Temperature  A: The very first combustion chamber: 800-1000 centi level.  The next combustion chamber: 1000-1200 centi level.  PLC mode based on model and order. 

Q: Operation and maintenance costs  A: Operation price based on fuel consumption rate and power/staff, etc. 

Annual around $500-$1000USD per year maintenance according version, utilize situation. 

One person can service 02 unit incinerators. Medical waste diesel incinerator, medical waste incinerators, mobile incinerator china, nanjing clover medical technology co., ltd., pet crematorium equipment, The staff must have basic electrician knowledge to operate/inspect/maintaince incinerator/burner/blower based on functionality consumer guider, and understand risk of medical waste to safeguard worker self with necessary protection component. 

Q: The Residency time in secondary combustion chamber 
A: 02 sec.

Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC)
Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour
Feed Capacity 20kg 40kg 60kg 100kg 200 kg
Control Mode PLC PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L 1200L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm
Secondary Chamber 50L 110L 180L 280L 600L
Smoke Filter Chamber Yes Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual Manual
Voltage 220V 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2
Temperature Monitor Yes Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L 200L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm
Chimney 3Meter 3Meter 5Meter 5Meter 10Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm

500kg/day burn capacity incinerator

Posted on by

in acinerator with 300 kg/ hour by double filter wet and dry.Pet Dead Body Incinerator upto 80 kg ,gas operated is prefered. animal waste incinerator with capacity about 40Kgs. We will use this product to burn the animal corpses in normal way (not sick aninal).Could you please forward me quotation for incinerator that is suitable for service Town with a population of 200,000 people including other general town waste to burn. Technical specifications data sheet
List and quantities of consumables required per month
List and cost of all the spares required annually
List and costs of all the spares required in 5 yrs
List and costs of all the spares required in 10 yrs

2 incinerators one with 500kg/day burn capacity another one with 1000kg/day burn capacity

1 x Electrode

1 x Fuel Filter

1 x Photocell

1 x Flexible pipe

1 x Nozzle

1 x Control Box