Combustion Efficiency     99.99%

Retention time    Of the flow gases not less than 2 Sec in the hot portion.

Excess Oxygen concentration  Of primary combustion chamber 3-6% max.

Refractory    The chambers should be lined with high thermal insulating refractory bricks with suitable thickness and

with highly temp. resistance. Not less than 1400 C for the first combustion chamber, and not less than 1600 C for the

secandry combustion chamber, and at the same time prevent the Temp. of the outside body of the chamber not higher than

70 C.

Doors    Should be lined with the same bricks, and the edges lined with special suitable insulating material to prevent

any gas escaping, and the doors should be kept under negative pressure during the operation.

Air Emission Control System  With high destruction and removal efficiency (DRE). Not less than 99.9999 as per KEPA.

Wet System  If the system equiped with a CEMS washing the flow gas with water, then it should be manufactured from

suitable anti corrossion materials, and equiped with pH meter to measure and neutralize the water. It should be able to

use the water in closed recycled circuit many times before treating/ discharging into the sewage system in compliance

with KEPARS.

Chemical dosing It should be equiped with suitable autochemical dosing system to control the pH for the water of the

wet scrubber system including sensors.

Chimney       It should be suitable with the capacity and the technical specifications, with height not less than 12m from

ground level. With easy opennable sampling point equal about 3 inch, and the optimum sampling locations is at least 8D

downstream direction and 2D upstream from any flow disturbancies.

Sampling point    Should be equiped with a platform located down the sampling point by a distance not less than 1 m, and

equiped with suitable stairs from ground to the port with comfortable slope.

Ash Removal      It should be auto ash removal system.

Fuel       It should be dual system, such as diesel and natural gas.

Feeding System  Should be auto feeding system into primary chamber.

Control Room     Should be equiped with a control panel shows Temp. of the combustion burners, gas monitoring, digital

Temp. indecation for the primary/secondary chambers, digital Temp. indication for the gases…etc. it should be also

Auto operation, burnures on/off auto lamps switch, auto start/stop for air emission control system, auto gas continuous

monitoring system reading and print out of gas emission parameters…etc.

Cooling System   The primary chamber should be provided with auto cooling systemthrough nozzles to permit direct cooling

if the Temp. will be heigher than 1100 C.

Inter-lock system       The incinerator should be equiped with inter-lock system to prevent feeding the waste to the

primary chamber if the combustion Temp. less than 500 C.

Flue treatment and cleaning     To consist a combined system (wet/dry), using water, lime, active carbon and ceramic

filters.

Quenching system/Heat exchanger Should be made and manufactured from anti corrosion and acid attack materials such as

stainless steel 316 or equivalent.

Noise Level  Not more than 85 dBA during normal operation.

Inaddition    The desigh should insure that responsive fail-safe control systems are used.

The incinerator should be installed inside closed suitable building with good aeration and ventilation system.

The building has facilities for off-loading of wastes from transport vehicles. Auto cleaning system for trucks and

waste containers, and cool storage area…etc.

The quotation should included list of original spare parts for 7 years.

The quotation should include supervising, starting up and training of the operators and ministry of health

engineers inside/outside Kuwait.

Detailed drawings, catalogs should be included.Our normal activities generates  2-5 tons of assorted waste

materials per day which range from condemned carcasses, and other wastes all which need to be incinerated  at above

800Centigrade measured  flue exhaust gas.

Product Description

Incinerator is a incineration equipment, direct fire squander by gas fuel or oi gas. As distinct circumscription, incinerator can be termed many words as below: 

Treatment capacity: Small scale incinerator, big scale incinerator and incineration pant.  All over the planet, in most nations, people anti incinerator because the incinerator will create a large Dioxin from the smoke. “Dioxins” refers to a group of poisonous chemical compounds that share certain chemical structures and biological features. Dioxins can be released to the environment through woods fires, backyard burning of garbage, particular industrial activities, and residue from past commercial burning of waste. Dioxins break down very slowly and previous releases of dioxins from both natural and man-made sources still exist from the environment. Anyhow, we have to remind this, that is big scale incineration pant, normally more than 30 ton per day. This is a social problem, clover incineraters, clover medical China, clover medical net, clover-medical, clovermedical. Net, structure of an incinerator, cost for incineration for pets cost of running 100kg,  Cremation equipment cost animal, to examine and suggest ways in various angles in the general public, government, economic growth, environmental protection, technology advancement, etc..

Therefore, why people still use incinerator?  First, for your medical waste in the hospital, the pyrolytic incinerators is greatest treatment up to now. Pyrolytic technology can kill the virus, pollution management.  Second, for individual body, pet animal, in most nations and regions, we want to cremation them. This is the service in the procedure for society growth, and ceremonies to commemorate the disappearance of life. 

As previously two reason but not only above, we still use incinerators. 

How you can find reasonable incinerator to your regional site?  Incinerator isn’t a cheap equipment, normally the small scale model's cost around $5, 000USD per unit and big scale model's cost more than $50, 000USD per unit. Thus, before purchase one unit incinerator, you need to make clear after items: A, burn what? Incinerator is a incineration equipment, function is fire squander. So what sort of waste you would like to treatment?  B, small or big? This according to the waste output daily or the waste volume per feed time, like animal size.  C, fuel? Incinerator use oil or gas , normally, gas fuel is cheaper than oil and also the smoke cleaner than petroleum gas version. However, some local site don't have gas supply system.  And other technology items, such as electricity (220V, 380V), waste feed doorway kind, incinerator structure, etc..

After you describe these, you can go to find a local or global manufacturers, requesting prices, technical specifications and ultimately purchasing the ideal products.

More smoke along with various other pollutants are introduced right into the air throughout the ‘‘ start-up’ as ‘well as ‘ amazing’ stages of the shed cycle

than throughout the ‘‘ full thaw phase ‘when heats are preserved. Reduced temperature degree smoldering fires need to be

prevented. Melt just dry feedstock as well as sometimes include added waste to the fire in order to keep high melt

temperature levels up until all waste has really been wrecked. If waste is to be open burned on the ground, taking advantage of deep or steep-walled

‘‘ pits’ have to be stayed clear of as this will certainly stop the necessary harsh mixing of oxygen with the burnable gases.

Preferred running temperature degree ought to be completed as promptly as feasible when running any kind of burning or incineration device. A

quick ‘‘ start-up’ can be achieved by initial openly filling completely dry paper, paperboard product packaging and without treatment wood right into the lower

of the gizmo. Dry, openly packed material will stimulate faster as well as also burn extra evenly than a damp, securely stuffed tons.

Moist waste requirement to simply be included after the fire is proactively burning. Overfilling the burn chamber will absolutely avoid the rainy

blending of burnable gases in addition to oxygen, along with should be protected against.

Modern batch feed incinerators are made with supporting as well as main heaters to accomplish as well as protect the required high

thaw temperature levels. Added waste needs to just be consisted of in these incinerators once the ‘‘ cool off’ phase has actually been

finished along with it is safe to do so.

a DUCK farm burner, we require to acquire a tool size incinerator for organic waste, a lot more specific DUCKS.an animal dog crematorium in ireland.Equipment Double chamber medical infectious waste burner Capacity 10-30 kg per hr Features of waste
The list listed below average features are thought about *:

residence heating well worth above 2000 kcal/kg (8370 kJ/kg); material of combustible matter over 60%; internet material of non flammable solids listed below 5%; product of non-combustible fines detailed below 20%; moisture material listed below 30% by weight

Burning efficiency: The medica waste burner will certainly be capable of minimizing waste to ash not exceeding 10% of the total flammable prices. The scientific waste burner will be installed outdoors. All burner parts will certainly be appropriate for however not restricted to outside shaded arrangement, consisting of electrical electric motors, be resistent to rust, dampness and also relevant climate aspects.

Outside installment. The clinical waste incinerator will be mounted outdoors. All incinerator components will be suitable for however not restricted to outdoor shaded setup, including electrical motors, be resistent to corrosion, wetness and also related climate aspects.

can you please onward me some info. an ideal Burner for Incineration of oil, plastic hazardous waste, sludge waste, harmful filters etc.