Product Description

Nanjing Clover Medical Technology Co., Ltd..

PLC( Programmable Logic Controller), Smart and Automated operation. Set combuston time based on different waste material and incinerator cease combustion .

The incinerator shall be equipped with a Diesel oil tank that will be supplied with DO from our DO tank located in the

power station. The tank shall be equipped with level switches and appropriate solenoid valves for automatic filling of

the tank. The tank shall also be equipped with a magnetic level indicator, level switches and appropriate drain valves,

separate overflow and vent pipes.

Oil-fired multi-stage waste incinerator of pyrolytic type shall be installed complete with interconnecting flue gas

ductwork between the incinerator and the chimney outlet.

The unit shall be manufactured in accordance with the latest ASME code, BS and DIN standards.

The waste disposal shall be environmentally acceptable and the incineration emission shall comply with the admissible

emission limits (international EC-Standards). The visibility of flue gases shall not exceed one Ringelmann. The waste

shall be completely burnt and the content of un burnt organic matter of the ash shall not exceed 3%.

The unit shall allow for a minimum of 2.0 seconds retention time.

1.2        QUALITY ASSURANCE:

1. Coordinate the entire assembly of incinerator, stack, controls, fuel supply.

1. Provide written certification that the entire assembly has been coordinated to achieve the required performance

and to provide the required features.

82. Equipment, installation, and operation shall conform to NFPA 82. Where conflicts exist between NFPA 82 and this

specification, this specification shall govern.

1.3        SUBMITTALS:

1. Submit in accordance with Section 01 33 23, SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES.

1. Incinerator:

1. Arrangement, description of construction, and outline drawings of incinerator and accessories showing

clearances and dimensions.

2. Predicted performance including burn time based on waste composition specified.

3. Calculation of secondary chamber retention time.

A chamber of article combustion of gases
Electric box

The secondary combustion chamber must ruin the contaminant merchandise and must withstand to high temperature(1100 °C)

Process Filtering method: Scruber to be mentionned as optional

A change circuit breaker for each engine (ventilators and burners).
OA device of injection of air allowing a entire recombustion of gases,
OA device of air ducts of cooling of waste gases,
O Composition of this refractory;

? Refractory concrete :
OA sheath of evacuation of the gases burnt.
OComposition of this refractory;
?
.

The incinerator shall be completely self contained.

The incinerator plant shall incorporate a control panel for its own operation. On the control panel we shall have a visual display of the chamber temperatures. This visual display must control and track the incinerator and his performance.

Ability of jealousy in weight shall be 60 Kg/h.

it ought to be able to operate less than 10 hours/day

This incinerator needs to have the ability to destruct all combustible wastes produced by hospitals, private clinics, laboratories, institutes, etc…

Design Specification: Types A, B, C, D, and E of medical waste

“PYROLYTIC” combustion, by simply controlling the gasification of waste.

The incinerator must prevent the release of black smoke and dust that is fine, throughout the loadings.

It shall have the ability to decrease the volume of wastes from 98%.

It shall have the ability to hold emission at the next burn with gasoline residence of less than 2 seconds.

The incineration should be completely free from visible smoke in addition to offensive odours.

1.0The primary ignition burner shall providing ignition of the waste to 850 °C and must switch off to conserve fuel.

the principal combustion chamber shall be built from heavy steel plate and the unit is lined with a complete layer of hote face refractory and higher performance insulation.

The Inner Width of the Chimney at least:? 400 and its elevation: 8 m

The loudness of the combustion chamber at least: 1.200 L

The Dimension of this door for loading in cm at least: 70×70.

Burner surgery ought to be Automatic On/Off
? Nature: Calcium
Fuel? : diesel

Manufacturer to provide  necessary information to your best of  this setup

The control panel shall have all appropriate audible and visual alerts to guarantee safe performance.

This incinerator with”PYROLYTIC” combustion must possess:
OElectro-ventilator distributing the secondary air, the regulation of the air flow has been completed by valves and adhering to the constraint of the automatic cycle.
?
.
OA secondary shot of air to guarantee perfect oxygen content.

A controller box ensuring the whole cycle of combustion.

Fan:

A chamber of post combustion of gases
oA burner of combustion of gases,
oA device of injection of air allowing a total recombustion of gases,
oA device of air inlet of cooling of waste gases,
oA sheath of evacuation of the gases burnt.
oCarcass in strong sheet steel with support of connection.
oComposition of the refractory;
?Refractory concrete :
?Thickness    : ≥150 mm
?Nature: 65% of Al203
?Insulate in fibrous panel :
?Thickness: ≥85 mm
? Nature: Calcium
oBurner with fuel, mono-bloc casting guiding type with horizontal flame, lighting and safety of electronic ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve.
oA secondary injection of air to ensure perfect oxygen content.

A control box ensuring the complete cycle of combustion.

Fan:
oElectro-ventilator distributing the secondary air, the regulation of the air flow being carried out by valves and following the control of the automatic cycle.
Controls and regulations:
Control box watertight to dust, including:

A switch circuit breaker for each engine (ventilators and burners).
A timer with adjustable temporization for the regulation of each burner.
A regulator with digital watching for the temperature of combustion.
A regulator with digital watching for the temperature of post combustion.
Electric box

The secondary combustion chamber must destroy the contaminant product and must resist to high temperature(1100 °C)

Process Filtering system: Scruber to be mentionned as optional

Basic Info.

Product Description

Program Scope:  1. Hospital& practice: Iatric Waste, Infectious Waste, Dressing, Bio-Waste, Medicine.  2. 3. Community & Sea Port & Station: Municipal Solid Waste, etc.  4.

HICLOVER, Nanjing Clover Medical Technology Co.,Ltd, supply system solutions for medical environmental protection, animal and pet cremation engineering, other municipal solid waste incineration project.

We provide single combustion chamber, dual glazing chambers, three combustion chambers and multi-combustion chambers waste incinerators for laboratory, hospital, clinic, medical centre, hygiene clinical waste destruction with medical disposable, biological waste, and medical plastic waste, and hazardous waste, and red bag waste, and needle disposal, gauze and bandages, sealed sharp containers, pathological waste, trace-chemotherapeutic wastes, etc..

Our assortment of incinerators cater to small to large scale animal cremation associated businesses, including poultry farms, cattle farms, sheep farms, pig farms, stables, kennels, testing laboratory, catteries, pet crematoriums.

The incinerator burn waste in primary combustion chamber and burn the smoke from primary combustion chamber again to make sure environmentally friendly with no black smoke, smelless, reduce pathogenic bacteria infection.

System solutions for medical waste environmental, including waste incineration, smoke emission treatment, high-temperature sterilization, ultraviolet sterilization lamp, waste shredder, needle destroyer, medical waste package, sharp containers, etc.

The pet cremation equipment humanized design with movable platform, small space covers for modern pet cremation business owner all over the world.

The containerized mobile incinerator mounted in ISO container before leave factory, pre-installation, no incineration house build construction, movable by truck and ultraviolet lamp sterilization inside.

HICLOVER is growing brand for environmental protection field, and market share with most of Africa, Middle East, Southeast Asia countries and part of North America, Europe territory. We are trusted partner for governmental organizations, non-profit organizations, international contractors, logistics organizations, military, pet cremation business owners, etc. We have export experience more than 40 countries, including war zone like Iraq, Afghanistan, Somalia, South Sudan.

We’re china incinerator manufacturer, builder and exporter.  Manufacturer make fair price for incinerator consumer, provide medical incinerator, hospital incinerator, animal incinerators, hog incinerators, pet cremation equipment, little incinerator, pet incinerator, animal incinerator, mobile incinerator, little animal incinerator, infectious waste pyrolysis machine, laboratory incinerator.  HICLOVER help customer decrease buy budget, custom made purpose, quality merchandise and friendly support.

Tel: +86-25-84610201 Email: [email protected]  Website: www.hiclover.com

Key Features:

— Full range incinerator with Economized Small Scale incinerator, Standard Small-Large Scale incinerator, General Municipal Solid Waste Incinerator, Pet and Animal Cremation, Containerized Mobile Incinerator, High Efficient Environmental Waste Incinerator.

— Single combustion chamber, double combustion chambers, three combustion chambers and multi-combustion chambers waste incinerators.

— System solutions for medical waste environmental.

— High burn rate, from 5kgs to 1000kgs per hour.

— New Design for pet animal cremation business.

— HICLOVER, trusted partner with years of experience.