Capacity of jealousy in weight: 60 Kg/h.

it ought to be in a position to operate less than 10 hours/day

This incinerator needs to be able to destruct all combustible wastes generated by hospitals, private clinics, laboratories, institutes, etc…

Design Specification: Types A, B, C, D, and E of medical waste 

“PYROLYTIC” combustion, by simply controlling the gasification of waste.

The incinerator should prevent the discharge of black smoke and fine dust, (Smokeless) throughout the loadings.

it ought to be able to decrease the volume of wastes from 98%.

it ought to be in a position to hold emission at the next burn with gas residence of less than 2 seconds.

The incineration must be wholly free of visible smoke as well as offensive odours.

The reduced volt electricity (L.C.P) of this waste will be 3,500 kcal/kg

The Temperatures of combustion: Minimum will be 850oC and max 1400oC

Post combustion: >1100oC.

The Inner diameter of the Chimney: Ø 400 and its own height: 8 m

The Loudness of the combustion room: 1.200 L

The Dimension of the door for loading in cm: 70×70.

Burner surgery ought to be Automatic On/Off

Gas: diesel

The supplier must supply necessary information for the top of  the installment

This incinerator with”PYROLYTIC” combustion should contain:

A combustion chamber of waste:

* Perfectly tight door for the manual loading of waste.  The loading must be Manual, Batch Load 

* A burner of lighting which the usage is limited to the ignition of waste.

* Frontage of loading door seals ended up on hinges, wheel of screw plug, elastic joint, and stuffing insulating from refractory.

* The insulation of the combustion chamber ought to be composed of refractory bricks, so using a high content of aluminum and insulates bricks in order to assure a minimum temperature on   the outside sheet metal.

* Composition of the refractory;

Refractory concrete:

. Nature: 42 percent of Al203

Insulate in panels that are fibrous:

. Thickness: ≥75 mm

Nature: Calcium silicate.

* Burner of lighting of waste, together with fuel, standard mono-bloc casting directing stirring flame, lighting and security of digital ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve.

* Plate of combustion in Carborundum, avoiding the fixing of glass and slags. 

* Plate of combustion in Carborundum, avoiding the fixing of glass and slags.