small medical waste incinerator


i- burners:

use diesel , natural gas , liquefied petroleum gases according to standards burners should have main vent to be used

for protection.

2- materials:

-the chamber should be covered from inside with refractory brick with thickness 22 cm aluminum silicate insulation 11cm

thickness with the ability to change this layer .

– All surfaces made of carbon steel should be surface treated and covered with primary layer. That holds the working

condition and easy to clean it is recommended that materials are chosen according to standard codes.

Chimney exhaust gas filtration:

To meet the European standard 2000/76/EC

Chimney height should not be less than 12 meter and radius 8 cm.

 

– Treat the gas has a minimum temperature of 1100 ° C with a minimum residence time of two seconds the afterburner is

to;

– A secondary air injection is expected and provides perfect oxygen content;

– The burner ensures a minimum temperature of 1100 ° C continuous;

– The design of this burner is similar to combustion burners;

– The afterburner is equipped with access doors in order to ensure regular cleaning of dust;

– The afterburner is lined with high thermal insulation with a thickness of 150 mm

 

  1. Cabinet, control and regulation:

– The entire installation will conform to European standards (EU)

– The electrical power is 220V 50Hz single phase.

– Regulators of temperature with digital display:

? 1 to regulate the temperature of the combustion chamber

? 1 for controlling the temperature of the afterburner

? The manual controls are provided on each item.

  1. Should have preparation, Incineration, Scrubber steps to burn waste completely and waste gas should be non-

polluted

 

  1. Heavy duty steel, heat resistant coating, stainless steel lid, painted tubular steel frame, 2-blowers, axial

vane, suitable drum (S/S, thick) for the incinerator must be provided.

 

  1. Approx. 20 to 25 Kg per batch and the time required for 1 batch not more than 1 hour on average.


tiny range scientific waste burner



Hazardous as well as likewise hazardous wastes,
Medical pharmaceutical along with pleasant fluids Wastes
Residential trash
Electric as well as electronic wastes
Hazardous waste
Generally, all kind of wastes and also rubbishes
Ability 50-60Kg/ h

Combustion sustaining materials
Coal oil, diesel oil

Temperature degree inside
800-10000C

1000-12000C

Burning performance
> 98%

Power intake
1.3 KW

Sound
< 78dB

Index of let smoke as well as waste gas
Ringelman’s smoke index < level 1

Smoke focus
Oil
45.5

( mg/m3 ).
Gas.
25.5

( mg/m3 )

SO.
Oil.
0.176.
Gas.
0.065

NOX.
Oil.
0.031.
Gas.
0.038

H2S.
Oil.
0.016.
Gas.
0.008

CO
.
Oil. 8.32.
Gas.
35.64

tiny scale clinical waste burner Demands.
Additionally eruptive as well as fireproof products not confessed

Refine way.
2 shedding storage rooms (wetness drying, warm dirt elimination)

Burning/ Heater.
Top quality made in Italy

Blower.
High quality made in China

Control Electrical.
High quality made in China

Ability 50 Kg/h

Performance Voltage.
220 V

Power.
1000 W

Applied For.
200 beds

Input Style.
Hands-on

Medical Burner, 24 kg/hr.
Clinical Heater, 24 kg/hr including panel board, regulates in addition to accessories.
Heating unit entry.
Chimney.
Blower.
Combustion heater

Medical Incinerator, 12 kg/hr.
Medical Heater, 12 kg/hr including panel board, controls as well as also devices.
Heater portal.
Smokeshaft.
Blower.
Burning burner

Medical Incinerator, 6 kg/hr.
Clinical Heater, 6 kg/hr including panel board, regulates in addition to tools.
Heater entrance.
Chimney.
Blower.
Burning heating unit



DROPPING AND ALSO INCINERATION OF SOLID WASTE


Biomedical Waste Any type of type of fluid or strong waste which may supply a danger of infection to individuals consisting of non-liquid tissue, body parts, blood or blood products as well as body fluids, research laboratory and also veterinary waste which includes human disease- setting off representatives, as well as disposed of sharps (i.e. syringes, needles, scalpel blades).

Base Ash The program likewise unburned and non-combustible product which remains at the shed site after burning is complete. This consists of products remaining to remain in the melt chamber, exhaust piping as well as air pollution control tools where such tools are utilized.

Burn Box A significant metal box used to lose solid waste. Burning air is commonly offered passively by means of openings or vents cut above lowest level of bundle. An exhaust pipeline or pile might or might not be attached.

Industrial Camp A short-term, seasonal or multi-year center with a capability greater than 15 individuals as well as likewise which has in fact been established for research study, commercial or business purposes. An industrial camp does not contain a standard camp or area camp.

Commissioner’s Land Lands that have in fact been relocated by Order-in-Council to the Federal Government of Nunavut. This consists of roads as well as land subject to block land transfers. The majority of Commissioner’s Land is located within districts.

Contamination Any kind of sound, heat, substance or vibration and also includes such numerous other substance as the Priest could prescribe that, where launched right into the ambience,

  • endangers the health, safety or welfare of persons,
  • interferes or is likely to interfere with the normal enjoyment of life or property,
  • endangers the health of animal life, or
  • causes or is likely to cause damage to plant life or to propert

Developed Initiative The reoccuring examination of possibilities for declines as well as the application of adjustments or discharge control upgrades that are practically and also financially useful along with which lead to on-going reductions in exhausts. Identified campaigns consist of the growth and execution of waste management preparation which is concentrated on air contamination avoidance.

De Novo Synthesis The manufacturing of complicated particles from easy particles.

Setting The aspects of the World as well as includes

  • air, land and water,
  • all layers of the atmosphere,
  • all organic and inorganic matter and living organisms, and
  • the interacting natural systems that include components referred to in paragraphs (a) to (c) above.

Field Camp A temporary, seasonal or multi-year facility consisting of outdoors tents or various other comparable short-term frameworks with a capacity of 15 people or less as well as which has been developed for research study, business or commercial objectives. An area camp does not consist of a traditional camp or industrial camp.

Fly Ash Unburned product that is sent right into the air in the type of smoke or excellent bit concern throughout the burning procedure.

Hazardous Waste An impurity that is a hazardous great and is no longer wanted or is pointless for its preliminary assigned purpose as well as additionally is intended for storage area, reusing, therapy or disposal.

Incineration A treatment technology including the damage of waste by regulated burning at heats.

Incinerator A gadget or framework intended primarily to blaze waste for the function of decreasing its volume, ruining a dangerous product in the waste or wrecking an infectious product in the waste. A heater has suggests to control the burning as well as air circulation processes.

Assessor A specific appointed under subsection 3( 2) of the Environmental Protection Act as well as likewise contains the Principal Ecological management Policeman.

Changed Burn Barrel A metal drum taken advantage of to shed waste that has been secured with gadgets or functions which supply minimal boosted warm generation, warm retention in addition to holding time.

Open up Burning of waste with restricted or no control of the melt treatment. For clearness, open burning consists of shedding on the open ground or utilizing a thaw box or altered or unmodified melt barrel.

Certified Person An individual that has a proper level of experience and also experience in all essential aspects of waste management.

Accountable Party The owner or person in charge, administration or control of the waste.

Smoke The gases, bit issue in addition to all other items of combustion generated right into the setting when a compound or product is thawed consisting of dirt, triggers, ash, residue, cinders and also fumes.

Strong Waste Unwanted strong products discarded from a residence (i.e. single or many building residences, various other comparable irreversible or short-lived homes), institutional (i.e. institutions, government centers, healthcare facilities in addition to health and wellness and health centres), organization (i.e. shops, eating facilities) or commercial (i.e. mineral, oil as well as gas exploration and growth) facility. For quality, solid waste does not contain biomedical waste, hazardous waste or sewage sludge.

Typical Camp A seasonal or brief camp used primarily for camping, searching, angling or various other regular or social jobs. A regular camp does not include a field camp or commercial camp.

Unmodified Burn Barrel A steel drum made use of to shed waste that has not been attached with tools or functions which offer enhanced warm generation, warmth retention along with holding time.

Ignored Timber Hardwood that has actually not been chemically fertilized, repainted or likewise altered to increase resistance to pests or weathering.

Waste Audit A supply or study of the quantity in addition to type of waste that is generated at an area.


incinerator manufacturers china


  1. Ash should be only 5% of the waste material

 

  1. Weight of Incinerator – 50-60 Kg

Municipal incinerators with a 10-metric ton/24-hour capacity, complete with Stacks, control panels and all accessories,

complying with 01015 par. 5.16.1

LOT

2.0

 

Medical incinerator with a 10 kg/hour (15 lbs/hour) capacity shall be constructed on the site, complete with Stacks,

control panels and all accessories

 

 

  1. 220V AC

 

  1. Surgical , medical & laboratory waste

 

 

  1. PRODUCT DIMENSIONS

 

Description   Dimensions

Destructive capacity  30 Kg / hour

Operation     12h/24, 6d / 7

Fuel       diesel oil

Chimney       Height: 5m, Diameter: 280mm

Volume of combustion

 

chamber Combustion: 0.3 m3

Post combustion: 0.2m3

Mixed combustion chamber: 0.3m3

` TEMPERATURES:

. Combustion

. Afterburner

900 ° C

1100 ° C

POWER BURNER

Combustion

Afterburner

 

0.11 KW

0.11 KW0

 

Fan power    0.37 kW


medical waste incinerators manufacturers


chemical agents to be utilized:
10% heptyl (unsymmetrical dimethylhydrazine) water solution,
heptyl (unsymmetrical dimethylhydrazine) vapour with 0.8 to 1.0 kg/m3 concentration,
10% azotic (nitric) acid water solution,
azotic (nitric) acid vapour with concentration up to 1.1 kg/m3;
2.    neutralization method: thermal decomposition;
3.    neutralization temperature: +800?C to +1200?C;
4.    performance:
?    vapour capacity: 70 to 200 m3/h,
?    water solution capacity: 50 to 500 l/h;
5.    inlet pressure: up to 2 bars;
6.    automatic control system;
7.    overall dimensions shall allow for mounting the unit on a vehicle chassis.
medical waste incinerators manufacturers General Specifications
6mm plate steel sheel construction
11cm 1400 o C Refractory L iner
Temperature controlled Burners
Secondary combustion Burners
Interlock Switch on Load Doors
Separate Ash Door
One Second secondary Residence @ 1000 o C
400 ° C Silicone Based Paint Finish.
Alloy Temperature Sensor
Factory wired and tested
Capacity-20 kg / hr
Primary Chamber-1607 L
Hearth Area-1:36 sq. m
Secondary Chamber-694 L
Primary Burner (oil)-420,000 btu
Secondary Burner (oil)-900,000 btu
secondary Combustion-1/6 hp
Exhaust Stack-46cm x 6m
Electrical Service-220/50
Weight System-5.700 kg
Dimension “D”-152cm
Load Port Height- 60x 60 cm
Ash Port Height -36 x 36 cm


animal waste incinerator


secondary chamber

1000 degree

 

chimney

standard

 

shredder

separately

 

Autoclave or microwaves

separately

 

temperature monitor

attached outside of machine

 

operating

Fuel and electric

During the start and end incineration operations at the waste incineration plant the temperature shall be maintained

at 850 °C, while it shall be 1100 °C when incinerating dangerous waste containing halogenated organic substances with

content of chlorine or its compounds. The temperature shall be maintained at 1000 °C during incineration of medical

waste.

MUNICIPAL SOLID WASTE INCINERATORS

 

Municipal waste incinerator quantities and capacities shall be designed for 24-hour 7-day-a-week continuous operation.

 

Incinerators shall be capable of processing both wet and dry material and operating on either diesel fuel, JP-8 fuel,

 

or waste oil; see Plumbing for fuel storage system requirements. The following shall be provided as a minimum:

 

Reinforced concrete mounting foundations, feed or charging hoppers (or loaders), primary combustion chambers

 

with ash cleanout doors, secondary combustion chambers with ash cleanout doors, cyclone air filters (or separators),


Burner medical waste



Lately among customers informed us their goal to procure 1 system Gas Incinerator.medical waste burner to shed the wastes of university hospital in Egypt, the capacity asked for is 5 lots per day.the medium heater that takes advantage of both power as well as likewise oil.A SMALL PET CREMATORY WITH GAS



pet cremation equipment


Waste Incinerator Capacity

The waste incinerator units shall be designed to burn medical waste load of capacity 50 kg/hr with calorific values

ranging from 2,300 kJ/kg to 30,000 kJ/kg at a designed thermal rate of 1,440,000 kJ/hr.

 

Method of Waste Charging

Waste shall be fed into the primary chamber manually, that is by hand. Semi-automatic or automatic feeding systems are

not required.

 

Method of Burning

The primary and secondary burners shall be equipped with at least one fuel oil burner each. Waste shall be manually fed

into primary chamber and heated to required ignition temperature of at least 600 degree Celsius. A controlled amount of

air shall be admitted by combustion air blower to maintain the necessary reaction heat required for thermal degradation

of waste. Smoke, ashes, volatile gases, etc generated from the primary chamber shall be effectively and efficiently

ignited in the secondary chamber. Emission through the stack shall be within environmental standards.

 

Combustion Chambers

The internal lining for combustion chambers shall be made up of pre-determined thickness and high temperature stability

insulation, high strength firebricks and castible refractory. The temperature rating for refractory shall be at least

1,500 degree Celsius. The casing of the chamber shall be constructed from high grade mild steel plate. Lifting devices

such as eye bolts and lifting lugs shall be fitted as standard.